Blaupunkt RTM 127 operating instructions Add entry Access, Capacity

Programming with DSC – Phone book

Add entry	Access
• Press / to select “Add entry” and	• Press / to select “Access” and
press OK.	press OK.

•	Press / to select the memory bank	Access
	for the entry, e.g.:	•	Press / to select the memory bank,
	“SIM card” or “Phone” and pressOK.
• Enter the new telephone number and			e.g.:
			“SIM card” or “Phone” and pressOK.
	press OK.
		• Press OK to confirm your selection.
• Use the numbers keys to enter the
		• Enter your access code.
	name and press OK.
• Enter the position and press OK.		“Phone”
If you do not enter a position the name and
		On	– It is not possible to access the tele-
number will be saved at the next available
			phone numbers saved in the phone
position.
			memory bank.
If you enter a position which already has a
name and number allocated to it, “Over- Off			– All of the locks have been removed
write?” will appear in the display.			for the phone.
Press OK to overwrite the previous entry
(this entry will be deleted).		“SIM card”
To add the next entry		On	– It is not possible to access the tele-
•	Press OK.		phone numbers saved on the SIM
If you are not in this menu, you can add			card
		Off	– All of the locks have been removed
entries if you press ME for approx. 1 sec-
ond. (Refer to “Save telephone numbers and			for the SIM card.
names”.)

“All”

On	– It is not possible to access the tele-
	phone numbers stored in the tele-
	phone memory bank or on the SIM
	card. It is not possible to store new
	telephone numbers.
Off	– All of the locks have been switched
	off.

“No locks”

–No locks have been activated for the SIM card or the phone.

Capacity

Use this function to determine how much storage capacity is available on the SIM card and in the telephone memory bank.

•Press / to select “Capacity” and press OK.

Access

Capacity

•Press / to select “SIM card” or “Phone “ and pressOK.

RadioDEUTSCH

ENGLSHTelefon

TelephoneRadio

113