Blaupunkt RTM 127 operating instructions DSC learn mode, Optical warning of anti-theft protection

KeyCard and SIM card

If necessary, refer to “How to enter a name/text “.

•Press DSC/OK.

•Enter the PIN code and press DSC/ OK.

After “CODE OK”, the display shows e.g. “SIM-CARD 23 ACCEPTED”(i.e. this is the 23rd SIM card you have trained).

The Radiophone can now be operated using the new cards.

If you attempt to program a third Key- Card, the KeyCard which was not part of the programming process will auto- matically become invalid.

c)Delete SIM card authorisations

The authorisation for SIM cards can be deleted using the CARD LIST in the DSC menu. The Master SIM card can be deleted with a KeyCard only.

DSC learn mode

With this function you can select whether you want to train additional SIM cards using the DSC menu only or each time after re- moving the KeyCard or the Master SIM card as well.

For operating instructions refer to ”Program- ming with DSC –LEARN MODE”.

Optical warning of anti-theft protection

Flashing KeyCard tongue

When the vehicle has been parked and the KeyCard or SIM card removed, the KeyCard tongue can be switched to flash to provide additional anti-theft protection.

For this function to operate properly it is nec- essary for the positive power supply line and the permanent +12 V lead to be connected as described in the installation instructions. Be sure that “KEYCARD LED ON”has been activated in the DSC mode.

If necessary, refer to the section on “Pro- gramming with DSC –KEYCARD LED”.

If 30 SIM cards have been pro- grammed, it will be necessary to delete old access authorisations before new cards can be trained.

b)Train new cards after removing the KeyCard or Master SIM card

If this function has been activated in the DSC learn mode, it will be possible to train additional SIM cards each time the KeyCard or Master SIM card is re- moved. This function is practical if you want to train several cards one after the other (fleet management).

Displaying the radio pass data

Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6..) and serial number indicated in the display.

Please refer to the section on “ Program- ming with DSC –READ KEYCARD”.

Switch off the flashing light

The flashing light can be switched off by pushing in the KeyCard tongue gently until it locks.

If you would like to deactivate the flashing tongue altogether, select the “KEYCARD LED OFF”item in the DSC menu:

78