Using the telephone
International calls
The services provided by your network op- erator allow you to place mobile phone calls in your own country.
Using the international GSM standard it is possible to place phone calls to parties in many countries of the world (either mobile or stationary).
In order to do this, the network operators concerned must have made a roaming agreement. Your network operator must also activate international roaming for your SIM card.
Your network operator can provide you with a currently valid list of the network opera- tors (network code and name) and the dif- ferent rates which apply.
Note:
If you want to make international calls, be sure to contact your network operator well ahead of time.
What to do before leaving for a foreign country
1.Have your network operator activate your SIM card for roaming.
2.Take a look at the list of networks. In many areas you can choose from among several different network oper- ators.
You need the network code and the network name.
The foreign network operators must be registered. Refer to Programming with DSC – Calls
“Network selection” in the directions for using the telephone.
3.Activate call forwarding from the sta- tionary telephone (at home, at the of- fice) to the Radiophone, if applicable.
How to place telephone calls in foreign countries
Dial the country access code for the coun- try you are calling, the city area code with- out the first “0” and then the telephone number. You can replace the first two digits of the country access code with “+” (press “0” for approx. 1 second).
Example: |
|
|
Country access |
|
|
code: | 0049 | Germany |
City area code: | 05121 | Hildesheim |
Teleph. number: | 49 . . . . Blaupunkt | |
You enter: | +49512149 | |
Tip:
Enter the country access code for all of the telephone numbers you save in the memo- ry.
How to receive calls
Callers from your home country merely dial the usual number for your mobile phone. Callers who are not located in your home country dial the country access code for your home country, even if you are currently lo- cated in another country.
How to place calls to a stationary tele- phone in the host country
Dial the city area code and the party’s tele- phone number.
You needn’t dial the country access code because your Radiophone has registered in the foreign network.
PaX (PAC) memory
The PaX memory allows you to directly ac- cess one certain function which was previ- ously saved in radio or telephone mode. In radio mode you can save the functions
–learn card or
–Radiotext on/off and activate them with PaX (PAC).
In telephone mode you can save the func- tions
–certain number
–call mailbox
–send SMS
108
