Programming with DSC – Setup
Press 
/
to select the position for your own phone number.
Press OK and enter your own phone number and press OK again. Enter a name if de- sired and press OK. The number will be saved in the memory.
Press OK, press 
/
to select the next po- sition, etc.
AOC parameters (Advice of Charge)
This function depends on the features the SIM card includes.
Note:
If your network operator does not support AOC, the time interval will be set to one minute. The value selected will be used for making calculations.
Ring. tones
My number
AOC param.
Audible call timer
You can set an audible beep which is emit- ted after a preset call time has elapsed.
Ring. tones
My number
AOC param.
Audib. timer
If AOC is not supported by the card, “Charge parameters” will appear as a menu item in its place.
The charge rates are determined by the network operator.
• Press / to select “AOC param.” and | • Press / to select “Audib. timer” and |
press OK. | press OK. |
You will be required to enter the “PIN2 code” | Press / to set the beep to Off or the tim- |
or the “Access code”. | er to between 15 ... 300 seconds. |
|
You can use this menu item to set the charg- es and a credit balance. As soon as the cred- it balance has been exhausted, it will not be possible to use the telephone until the cred- it balance is replenished by an authorised person.
After this, you can enter a charge per unit and a credit balance.
Use the numbers keys to alter the amount and the type of currency.
Press CL to quit the menu item.
The alteration will be transferred to the SIM card.
Note: If the credit balance is set to “0.00”, the credit balance function is deactivated.
Use the numbers keys to alter the time in- terval. You can select from 15 to 300 sec- onds. The cursor will flash on the last char- acter of the interval selected.
After you have pressed OK, “Audible call timer” will appear in the display. You can select the next menu item.
116
