Samsung DVD-V940K Using the Timer Programming Feature, Checking a Preset Recording

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.

☛Before presetting a recording, check that the date and time are correct.

1Insert the cassette and press TIMER on the remote control.

Result: The Timer Programming is displayed.

➢Auto Tape Speed select. The DVD-VCR’s “Auto Tape Speed select” function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in AUTO mode, the DVD-VCR automatically switches to LP mode to record the whole programme.

2Select the required station by pressing the

,❷ buttons or INPUT SEL. to select the LINE1, input sources.

3Press ❿ to select the recording day.

4 Select the required day by pressing the ,❷ buttons.

5Press ❿ to select the recording start time.

6 Select the required hour value by pressing the	,
❷ buttons.

7Press ❿ to select the minutes.

8Select the required minute value by pressing the ,❷ buttons.

9Press ❿ to select the recording stop time.

10Select the required recording stop time by pressing the ,❷ buttons, following the same procedure as when selecting the recording start time.

11Press ❿ to select the recording speed.

12Press the ,❷ buttons to select the SP (Standard Play), LP (Long Play), Auto (Auto Tape speed Select) recording speeds.

13When you have finished, press the RETURN button.

14Press the STANDBY/ON button to activate the timer. Result: Before starting recording, the DVD-VCR

compares the timer duration with the remaining time on the cassette.

Checking a Preset Recording

You can check your preset recordings:

◆When you have finished presetting the DVD-VCR

◆If you have forgotten which programmes will be recorded

1Press TIMER on the remote control.

Result: The Timer Programming is displayed.

2Press the ➛ or ❿ buttons to select and change any values as required. For more details, refer to the previous page.

3On completion, press RETURN twice.

ENG-19