ENG-11
Presetting the Stations Automatically☛
You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 8).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 8)
◆
Automatically
◆
Manually (see page 12)
You can store up to 80 stations.
1After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2Press the corresponding
,
❷
buttons to select
the Install option.
3Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Install
Result:
◆
The Please Wait indication highlight on
the television screen.
◆
The first frequency band is scanned and
the first station found is stored.
◆
The DVD-VCR then searches for the
second station and so on.
◆
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
6If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
➢
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required.
(See page 13)
Auto Setup
Your data will be lost
Press OK to continue
Menu to exit
Auto Setup
Please Wait
15%
4Press the corresponding
,
❷
buttons, until the
Auto Setup is selected.
And then press the OK or
❿
to select this option.
Result: A message appears, indicating that any
channels already preset on your DVD-VCR
will be deleted.
5Press OK to start the auto scanning.