ENG-22

Index Skip Search

This feature will enable you to fast forward/rewind to a
specific point on a tape: E.g. if you have recorded 3
different programmes on a tape and you have rewound
the tape to the beginning, by using this feature you can
go directly to the start of programme 2 simply by
pressing the SEARCH button.
1After pressing the SEARCH, press the
corresponding
,
❷
buttons, until the Intro Scan
option is selected.
2Press the OK or
❿
.
3Press the
➛➛
or
❿❿
buttons twice more.
This will take you directly to the start of the desired
programme is located.
4These Index searches can be made forwards:
(press
❿❿
) or backwards: (press
➛➛
).
(
➛➛
-20
● ●
0
● ●
+20
❿❿✌
5To cancel an Index search simply press the
❿
II
or
■
button.
Searching for a Specific Sequence

Go To [0:00:00] Stop

Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1After pressing the SEARCH, press the
corresponding
,
❷
buttons, until the Go To
[0:00:00] option is selected.
2Press the OK or
❿
.

End Search

Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.If
the VCR reaches the end of the tape during end
search, the tape will be ejected.
1After pressing the SEARCH, press the
corresponding
or
❷
buttons, until the End
Search option is selected.
2Press the OK or
❿
.

Intro Scan

1After pressing the SEARCH, press the
corresponding
,
❷
buttons, until the Intro Scan
option is selected.
2Press the OK or
❿
.
3Press the
➛➛
or
❿❿
buttons depending on the
direction where your desired programme is located.
4When an Index mark is found the DVD-VCR will
playback the tape for 5 seconds, after which it will
continue searching for the next Index mark.
5If you want to watch the tape from a particular
Index, simply press
❿
II
twice.
INTRO SCAN :
INDEX SEARCH : - 6
Each time you record a cassette on this DVD-VCR, an
“index” is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
21 12
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
➢
This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.