Samsung DVD-V940K Setting the DVD-VCR Output Channel, Selecting the RF OUT Sound Mode (G-K) , Changing the Preset Station Table

ENG-14
You can choose the sound mode (G or K) according to
the TV set connected to your VCR.
1After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2Press the corresponding  , ❷ buttons to select
the Install option.
3Press the OK button to select this option.
Result: The Install menu is displayed.
4Press the OK  or ❷ buttons, until the TV
System option is selected.
5Press the OK or ❿ button to select G or K.
6On completion, press RETURN to exit the menu.
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
1After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2Press the corresponding  , ❷ buttons to select
the Install option.
3Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4Press the  , ❷ buttons, until the VCR Output CH
option is selected.
5Select the required output channel (CH21~CH69)
by pressing the OK or ❿ buttons. and ➛ buttons.
 CH21  .. CH36  .. CH69 
6On completion, press RETURN to exit the menu.
Then tune your television again (see page 8).
Setting the DVD-VCR Output
Channel
Selecting the RF OUT Sound
Mode (G-K)
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
G
K
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Install
CH:21
:
CH:36
:
CH:69
7To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
8Press the  , ❷ buttons to select required position.
And then press OK again to swap the position.
9On completion, press the RETURN button four
times to exit the menu.
Changing the Preset
Station Table