Samsung DVD-V940K Connecting DVD-VCR to the TV using the AV Cable, Connecting DVD-VCR to a Satellite Receiver or Other Equipment

ENG-7
Connecting DVD-VCR to the
TV using the AV Cable
Connecting DVD-VCR to a
Satellite Receiver or Other
Equipment
You can connect your DVD-VCR to the television using
the AVcable if the appropriate input is available on the
television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your
DVD-VCR
☛ Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
☛ Make sure that both the television and the
DVD-VCR are switched off before connecting the
cables.
1Connect the coaxial cable as indicated on page 6.
2Connect one end of the AV cable to the Video
output and Audio L, R output socket on the rear of
the DVD-VCR.
3Plug the other end into the appropriate connector
on the television.
4To view DVD-VCR, you must select AV mode on
your TV.
You can connect other audio and/or video equipment
to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection
possibilities.
➢ The AV input/output connectors on the rear of
the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
Aerial
RF coaxial cable
TV
REAR OF THE
DVD-VCR
Camcorder
VCR
Sound system
3
2