Programming with DSC – Setup
Automatic answer
The telephone is able to answer incoming calls automatically.
•Press 
/
to select “Auto. answer” and press OK.
•Press 
/
to select the setting you want and press OK.
Off | – The automatic answer function is |
| switched off. |
On | – The automatic answer function is |
| switched on. The call will be set |
| to |
| cally. In this case, do not set the |
| ringing tone volume to “0”. |
Automatic redial
If the busy signal is received, an outgoing call can be redialled automatically.
•Press 
/
to select “Auto. redial” and press OK.
•Press 
/
to select the setting you want and press OK.
OFF – Redial is switched off
ON – Redial is switched on
The first redial call will be placed immedi- ately. The following calls will be placed at preset intervals (network dependent). The number of times the telephone will attempt to redial depends on the network operator. You can stop the automatic redial function by pressing the telephone button.
Ringing tone
You can select the ringing tone separately for the following functions.
•Press 
/
to select “Ring. tone” and press OK.
Ringing tone | DEUTSCH |
| |
Press / to choose from “Standard, |
|
Smooth, Rising (ringing tone gets louder with |
|
each ring), Off”. |
|
“Off” corresponds to “Ringing tone volume = 0”.
SMS tone | Radio | |
| ||
If a message has been received by SMS or |
| |
voice mail, the equipment can be set to emit |
| |
a beep at a preset beep volume. | Telefon | |
On | – beep is emitted after a message | |
| has been received | |
|
| |
Off | – beep is switched off |
|
My number
A maximum of three of your own phone num- | ENGLSH | |
bers and the phone number of your mailbox | ||
can be entered here. |
| |
The mailbox number is required to be able |
|
|
|
| |
to call it directly from the call menu. |
|
|
|
| Radio |
|
|
|
Ring. tones |
| |
Ring. tones
My number | Telephone |
|
115
