Blaupunkt RTM 127 operating instructions Recall stored radio stations, Alter search sensitivity

Radio operation with RDS (Radio Data System)

briefly in the display if you are using the same memory bank.

Automatically store the stations with the strongest reception using Travelstore

You can automatically store the nine most powerful FM stations in your current recep- tion area in the “FMT”memory bank, sorted according to their signal strength. This func- tion is particularly convenient during longer trips. This will have no effect on the radio stations stored in the FM, MW or LW mem- ory banks.

•Press BND/TS for 2 seconds. “TRAVELSTORE”will flash in the display.

The nine strongest FM stations will be auto- matically stored on the “FMT”(Travelstore) memory bank.

When this process has been completed, the radio will play the station stored on preset button 1, which is the station with the strong- est reception.

If desired, stations can also be stored man- ually on the Travelstore memory bank (re- fer to “Store radio stations”).

Recall stored radio stations

a)You can recall any stored radio station at the touch of a button.

•Press BND/TS repeatedly until the desired waveband appears in the display.

•Press the corresponding preset but- ton briefly to recall the station.

If you wish to recall a station stored on

a two-digit preset (e.g. preset 19) first press 1 and then 9 within the next

2 seconds.

b)You can select a radio station from the radio station list provided for each waveband:

• Press BND/TS to select the wave- band (FM, FMT, MW, LW).

• Press ME.

• Press / to select the desired ra- dio station.

• Press OK on the operating panel or ME on the remote control unit.

The radio station you have selected will begin to play.

Alter search sensitivity

You can alter the automatic search sensi- tivity.

If “lo”is displayed, the radio will only pick up strong, local stations.

If “lo”is switched off, the radio will also pick up weaker, more distant stations.

To switch the search sensitivity:

• Press *.

The sensitivity level can be selected sepa- rately for each memory bank (refer to the section on ”Programming with DSC – DX / LO-LEVEL”).

Switch from stereo to mono (FM only)

Every time the radio is switched on, stereo playback will be activated automatically. The unit will gradually switch to mono if the reception quality deteriorates beyond a cer- tain point.

RadioDEUTSCH

ENGLSHTelefon

TelephoneRadio

87