Interface Commands
Example
Ethernet 1/ 1 Iftable stats:
Octets input: 113404, Octets output: 742007
Unicast input: 739, Unicast output: 836
Discard input: 0, Discard output: 0
Error input: 0, Error output: 0
Unknown protos input: 0, QLen output: 0 Extended iftable stats:
Broadcast input: 38, Broadcast output: 0
Alignment errors: 0, FCS errors: 0
Single Collision frames: 0, Multiple collision frames: 0
SQE Test errors: 0, Deferred transmissions: 0
Late collisions: 0, Excessive collisions: 0
Internal mac transmit errors: 0, Internal mac receive errors: 0
Frame too longs: 0, Carrier sense errors: 0
Symbol errors: 0 RMON stats:
Drop events: 0, Octets: 855411, Packets: 2104
Broadcast pkts: 38,
Undersize pkts: 0, Oversize pkts: 0
Fragments: 0, Jabbers: 0
CRC align errors: 0, Collisions: 0
Packet size <= 64 octets: 1332, Packet size 65 to 127 octets: 123
Packet size 128 to 255 octets: 15, Packet size 256 to 511 octets: 142
Packet size 512 to 1023 octets: 9, Packet size 1024 to 1518 octets: 483 Console#
Related Commands
show controllers
show interfaces switchport
This command displays the administrative and operational status of the specified interfaces.
Syntax
show interfaces switchport [interface]
interface
•ethernet unit/port
-unit - This is device 1.
-port - Port number.
•port-channel channel-id (Value: 1)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec