Accton Technology VS4512DC manual Dhcp Commands, Dhcp Client, Ip dhcp client-identifier

Command Line Interface

DHCP Commands

These commands are used to configure Dynamic Host Configuration Protocol (DHCP) client. You can configure any VLAN interface to be automatically assigned an IP address via DHCP.

DHCP Client

Command	Function	Mod	Pag
		e	e
ip dhcp client-identifier	Specifies the DHCP client identifier for this switch	IC	4-82
ip dhcp restart client	Submits a BOOTP or DHCP client request	PE	4-83

ip dhcp client-identifier

This command specifies the DCHP client identifier for the current interface. Use the no form to remove this identifier.

Syntax

ip dhcp client-identifier {text text hex hex} no ip dhcp client-identifier

•text - A text string. (Range: 1-15 characters)

•hex - The hexadecimal value.

Default Setting

None

Command Mode

Interface Configuration (VLAN)

Command Usage

This command is used to include a client identifier in all communications with the DHCP server. The identifier type depends on the requirements of your DHCP server.

Example

Console(config)#interface vlan 2

Console(config-if)#ip dhcp client-identifier hex 00-00-e8-66-65-72 Console(config-if)#

Related Commands

ip dhcp restart client (4-83)

4-82