Command Line Interface
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
•The SSH server supports up to four client sessions. The maximum number of client sessions includes both current Telnet sessions and SSH sessions.
•The SSH server uses DSA or RSA for key exchange when the client first establishes a connection with the switch, and then negotiates with the client to select either DES
•You must generate the host key before enabling the SSH server.
Example
Console#ip ssh crypto
Console#configure
Console(config)#ip ssh server
Console(config)#
Related Commands
Event Logging Commands
ip ssh timeout
Use this command to configure the timeout for the SSH server. Use the no form to restore the default setting.
Syntax
ip ssh timeout seconds no ip ssh timeout
seconds – The timeout for client response during SSH negotiation. (Range:
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response from the client during the SSH negotiation phase. Once an SSH session has been established, the timeout for user input is controlled by the