Configuring the Switch
Web – Click System, System Information. Specify the system name, location, and contact information for the system administrator, then click Apply. (This page also includes a Telnet button that allows access to the Command Line Interface via Telnet.)
CLI – Specify the hostname, location and contact information.
Console(config)#hostname | |||
Console(config)#exit |
|
| |
Console#show system |
| ||
System description: |
| ||
System OID string: 1.3.6.1.4.1.259.6.13.4 |
| ||
System information |
|
| |
System Up time: 0 days, 6 hours, 7 minutes, and 9.51 seconds |
| ||
System Name |
| : |
|
System Location | : R&D |
| |
System Contact | : Geoff |
| |
MAC address |
| : |
|
Web server |
| : enable |
|
Web server port | : 80 |
| |
Web secure server | : enable |
| |
Web secure server port : 443 |
| ||
Telnet server | : enable |
| |
POST result |
|
|
|
DUMMY Test 1 | ................. | PASS |
|
UART LOOP BACK Test | PASS |
| |
DRAM Test | PASS |
| |
Timer Test | PASS |
| |
RTC Test | PASS |
| |
PCI Device | Test | PASS |
|
Firmware DownloadPASS |
|
| |
Switch Int Loopback test | .....PASS |
|
Done All Pass.logy change notification.
Console#