Command Line Interface
Command Mode
Privileged Exec
Example
Console#show queue
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 0 0 1 1 2 3 2
Console#
Priority Commands (Layer 3 and 4)
Command | Function | Mode | Page |
map ip precedence | Enables IP precedence class of service mapping | GC | |
|
|
|
|
map ip precedence | Maps IP precedence value to a class of service | IC | |
|
|
|
|
map ip dscp | Enables IP DSCP class of service mapping | GC | |
|
|
|
|
map ip dscp | Maps IP DSCP value to a class of service | IC | |
|
|
|
|
show map ip precedence | Shows the IP precedence map | PE | |
|
|
|
|
show map ip dscp | Shows the IP DSCP map | PE | |
|
|
|
|
map ip precedence (Global Configuration)
This command enables IP precedence mapping (i.e., IP Type of Service). Use the no form to disable IP precedence mapping.
Syntax
[no] map ip precedence
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.
•IP Precedence and IP DSCP cannot both be enabled. Enabling one of these priority types will automatically disable the other type.
Example
The following example shows how to enable IP precedence mapping globally:
Console(config)#map ip precedence
Console(config)#