Configuring the Switch
Web – Click Priority, IP DSCP Priority. Select an entry from the DSCP table, enter a value in the Class of Service Value field, then click Apply.
CLI – The following example globally enables DSCP Priority service on the switch, maps DSCP value 0 to CoS value 1 (on port 1), and then displays the DSCP Priority settings.
Console(config)#map | ip dscp | |||
Console(config)#interface ethernet 1/1 | ||||
| ||||
| ||||
Console#show map ip | dscp ethernet 1/1 |
| ||
DSCP mapping status: enabled |
| |||
Port | DSCP COS |
|
| |
|
| |||
Eth 1/ 1 | 0 | 0 |
|
|
Eth 1/ 1 | 1 | 0 |
|
|
Eth 1/ 1 | 2 | 0 |
|
|
. Eth 1/ 1 | 3 | 0 |
|
|
. |
|
|
|
|
. |
|
|
|
|
Eth 1/ 1 | 61 | 0 |
|
|
Eth 1/ 1 | 62 | 0 |
|
|
Eth 1/ 1 | 63 | 0 |
|
|
Console# |
|
|
|
|
*Mapping specific values for IP DSCP is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.