Multicast Filtering Commands
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Console(config)#ip igmp snooping
Console(config)#
ip igmp snooping vlan static
This command adds a port to a multicast group. Use the no form to remove the port.
Syntax
[no] ip igmp snooping vlan
•
•
•interface
•ethernet unit/port
-unit - This is device 1.
-port - Port number.
•port-channel channel-id (Value: 1)
Default Setting
None
Command Mode
Global Configuration
Example
The following shows how to statically configure a multicast group on a port:
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet 1/5 Console(config)#
ip igmp snooping version
This command configures the IGMP snooping version. Use the no form to restore the default.
Syntax
ip igmp snooping version {1 2} no ip igmp snooping version
•1 - IGMP Version 1
•2 - IGMP Version 2