Command Line Interface
databits
This command sets the number of data bits per character that are interpreted and generated by the console port. Use the no form to restore the default value.
Syntax
databits {7 8} no databits
•7 - Seven data bits per character.
•8 - Eight data bits per character.
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input from devices that generate 7 data bits with parity. If parity is being generated, specify 7 data bits per character. If no parity is required, specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Related Commands
parity
parity
This command defines the generation of a parity bit. Use the no form to restore the default setting.
Syntax
parity {none even odd} no parity
•none - No parity
•even - Even parity
•odd - Odd parity
Default Setting
No parity