Class of Service Configuration
Command Attributes
•Default Priority* – The priority that is assigned to untagged frames received on the specified interface. (Range: 0 - 7, Default: 0)
•Number of Egress Traffic Classes – The number of queue buffers provided for each port.
*The CLI displays this information as “Priority for untagged traffic.”
Web – Click Priority, Default Port Priority or Default Trunk Priority. Modify the default priority for any interface, then click Apply.
CLI – This example assigns a default priority of 5 to port 3.
Console(config)#interface ethernet 1/3 | ||
| ||
| ||
Console#show interfaces switchport ethernet 1/5 | ||
Information of Eth 1/5 |
| |
Broadcast threshold: Enabled, 500 packets/second |
| |
Lacp status: Disabled |
| |
Ingress rate limit: disable,100M bits per second |
| |
Egress rate limit: disable,100M bits per second |
| |
VLAN membership mode: Hybrid |
| |
Ingress rule: Disabled |
| |
Acceptable frame type: All frames |
| |
Native VLAN: 1 |
|
|
Priority for untagged traffic: 0 |
| |
Gvrp status: Disabled* |
| |
Allowed Vlan: | 1(u), |
|
Forbidden Vlan: |
|
|
Console# |
|
|
|
|
|
* Not supported in the current version