Configuring the Switch
CLI – The following example shows IP Port 80 mapped to CoS value 0 for ethernet port 1.
Console(config)#map | ip port | |||
Console(config)#interface ethernet 1/5 |
| |||
| ||||
Console# | show map ip port ethernet 1/5 | |||
TCP port | mapping status: enabled |
| ||
Port |
| Port no. COS |
| |
| ||||
Eth 1/ | 5 | 23 | 0 |
|
Eth 1/ | 5 | 80 | 0 |
|
Eth 1/ | 5 | 1020 | 6 |
|
Console# |
|
|
|
|
|
|
|
|
|
Copy Priority Settings
In the Copy Settings page you can copy the priority settings from a selected port or trunk to another selected port or trunk.
Command Attributes
•Source Interface – The port or trunk from which the priority settings are copied.
•Destination Interface – The port or trunk to which the priority settings are copied.
Web – Click Priority, Copy Settings. Check the type of priority settings to be copied, select the source interface and destination interface, then click Copy Settings.