Port Configuration
Web – Click Port, LACP, Configuration. Select switch ports from the
CLI – The following example enables LACP for ports 13 and 14. Just connect these ports to
Console(config)#interface ethernet 1/13 | |
| |
Console(config)#interface ethernet 1/14 |
|
| |
| |
Console#show interfaces status |
Information of Trunk 1
Basic information:
Port type: 1000GBIC
Mac address:
Configuration:
Name:
Port admin status: Up
Capabilities: 1000full,
Flow control status: Disabled
Port security: Disabled
Max MAC count: 0
Port security action: None
Combo forced mode: None
Current status:
Created by: Lacp
Link status: Up
Port operation status: Up
Operation
Flow control type: None
Member Ports: Eth1/3, Eth1/14,
Console#