Accton Technology VS4512DC manual Switchport native vlan, Switchport allowed vlan

Command Line Interface

switchport native vlan

This command configures the PVID (i.e., default VLAN ID) for a port. Use the no form to restore the default.

Syntax

switchport native vlan vlan-idno switchport native vlan

vlan-id- Default VLAN ID for a port. (Range: 1-4093, no leading zeroes)

Default Setting

VLAN 1

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•If an interface is not a member of VLAN 1 and you assign its PVID to this VLAN, the interface will automatically be added to VLAN 1 as an untagged member. For all other VLANs, an interface must first be configured as an untagged member before you can assign its PVID to that group.

•If acceptable frame types is set to all or switchport mode is set to hybrid, the PVID will be inserted into all untagged frames entering the ingress port.

Example

The following example shows how to set the PVID for port 1 to VLAN 3:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport native vlan 3

Console(config-if)#

switchport allowed vlan

This command configures VLAN groups on the selected interface. Use the no form to restore the default.

Syntax

switchport allowed vlan {add vlan-list[tagged untagged] remove vlan-list}no switchport allowed vlan

•add vlan-list- List of VLAN identifiers to add.

•remove vlan-list- List of VLAN identifiers to remove.

•vlan-list- Separate nonconsecutive VLAN identifiers with a comma and no spaces; use a hyphen to designate a range of IDs. Do not enter leading zeros. (Range: 1-4093).

Default Setting

All ports are assigned to VLAN 1 by default.

The default frame type is untagged.

4-142