Accton Technology VS4512DC manual Show controllers efm phy-table

Command Line Interface

Example

Console#show controllers efm line-table
VDSL_LINE_ENTRY	:
Ethernet 1/1	Line Coding	3
Ethernet 1/1	Line Type	4
Ethernet 1/1	Line Config Profile	DEFVAL
Ethernet 1/1	Line Alarm Config Profile	DEFVAL
.
.
.
VDSL_LINE_ENTRY	:
Ethernet 1/12	Line Coding	3
Ethernet 1/12	Line Type	4
Ethernet 1/12	Line Config Profile	DEFVAL
Ethernet 1/12	Line Alarm Config Profile	DEFVAL
Console#

Parameter		Description
Line Coding	Specifies the VDSL coding type used on this line.
	1.	Others (none of the following)
	2.	Multiple Carrier Modulation
	3.	Single Carrier Modulation
Line Type	Defines the type of VDSL physical line by defining whether and how the line is
	channelized.
	1.	No channels exist
	2.	Only fast channels exist
	3.	Only interleaved channels exists
	4.	Either fast or interleaved channels exist
	5.	Both fast and interleaved channels exist
Config Profile	In this version, only “DEFVAL” is displayed.
Alarm Config Profile	The alarm profile is pre-configured to send trap messages via SNMP protocol
	to register errors on the VDSL line.

show controllers efm phy-table

This command displays physical interface information for the selected VDSL port. For details see “Displaying VDSL Interface Information” on page 3-66.

Syntax

show controllers efm phy-table {vtu-r vtu-c} [interface]

•vtu-r– VTU (VDSL Transceiver Unit) at the remote end of the line

•vtu-c– VTU (VDSL Transceiver Unit) at the near (central) end of the line

•interface – Ethernet interface to display

•unit/port

-unit - This is device 1

-port - Port number

4-118