Command Line Interface
Example
Console#show interfaces status ethernet 1/1
Information of Eth 1/1
Basic information:
Port type:
Mac address:
Configuration:
Name:
Port admin: Up
Capabilities: 10half, 10full, 100half, 100full,
Broadcast storm: Enabled
Broadcast storm limit: 650 packets/second
Flow control: Disabled
Lacp: Disabled
Port security: Disabled
Max MAC count: 0
Port security action: None
Current status:
Link status: Up
Port operation status: Up
Operation
Flow control type: None
Console#
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
•ethernet unit/port
-unit - This is device 1
-port - Port number
•port-channel channel-id (Value: 1)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a description of the items displayed by this command, see “Showing Port Statistics” on page
