Configuring the Switch
Setting Broadcast Storm Thresholds
Broadcast storms may occur when a device on your network is malfunctioning, or if application programs are not well designed or properly configured. If there is too much broadcast traffic on your network, performance can be severely degraded or everything can come to complete halt.
You can protect your network from broadcast storms by setting a threshold for broadcast traffic for each port. Any broadcast packets exceeding the specified threshold will then be dropped.
Command Usage
•Broadcast Storm Control is enabled by default.
•The default threshold is 500 packets per second.
•Broadcast control does not effect IP multicast traffic.
•The specified threshold applies to all ports on the switch.
Command Attributes
•Threshold – Threshold in packets per second. (Options:
per second; Default: 500 packets per second)
•Broadcast Control Status – Shows whether or not broadcast storm control has been enabled. (Default: Enabled)
Web – Click Port, Broadcast Control. Set the threshold, set Broadcast Control Status to enabled, then click Apply.
