30Using the EDS Mode

Selecting a switch

❏While in the EDS Modes (EDS-1 or EDS-2), use the control panel’s SWITCH button to select a bank switch. While the SW indicator is flashing, the lit indicator indicates the currently selected switch.

Lit Indicator

Selected Switch

 

 

A1

1

 

 

B2

2

 

 

C3

3

 

 

D4

4

 

 

E5

5

 

 

F6

6

 

 

Changing a switch setting

❏After selecting a bank and switch, press the control panel’s ON/OFF button to turn the switch on and off. The current setting of the switch is shown by the ON LINE indicator: the indicator is lit when the switch is on, and is not lit when the switch is off.

Printing the current switch settings

❏In the EDS Modes, press and hold the control panel’s PRINT button to print out the current switch settings. Asterisks on the printout show whether a switch is turned on or off.

Exiting the EDS Modes

❏Press the control panel’s EXIT button to exit the EDS Modes.

EDS Modes Settings

The following details all of the settings you can program in the EDS Mode.

Page 37 Page 39
Page 38
Image 38
Star Micronics LC-8521 user manual Selecting a switch, Changing a switch setting, Printing the current switch settings
Page 37 Page 39
Top Page Image Contents