Toshiba 55HT1U manual Selecting the cinema mode, Usingthe CiearFrameTM feature

Selecting the cinema mode

When you view a DVD (3:2 pulldown processed) from a DVD player connected to the VJl[}F0,C010rStream

ND (component video), or N[}NI inputs oll the TV, smoother motion can be obtained by setting the Cinema Node to Film.

To set the Cinema Mode to Film: (available for 480i and 1080i signals)

Press MENU© and open the Picture menu, highlight

Picture Settings and press @.

?Highlight Advauce PictureSettings and press @.

3[n the Cinema Node field, select Film.

4' To save the new settings, highlight Doue and

press @.

To revert to the factory defaults, highlight Reset

and press @.

To set the Cinema Mode to Video:

Select Video in step 3 above.

Usingthe CiearFrameTM feature

The new ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating

motion blur without adding flicker or reducing image brightness.

To turn on the ClearFrame:

Press MENU© and open the Picture menu, highlight Picture Settings and press @.

2Highlight AdvaucedPictureSettings and press @.

3In the CJearFrame field, select 0u.

4' To save the new settings, highlight Doue and

press @.

To revert to the factory defaults, highlight Reset

and press @.

No te:

oif you select one of the factory-set picture modes (Sports, Standard, Movie or PC) and then change the ClearFrame setting, the picture mode automatically changes to Preference.

oWhen ClearFrame is set to Off, the Film Stabilization feature will not be available

(grayed out and set to Off).

Usingthe Film Stabilization feature

This feature helps to eliminate video shaking. To turn on Film Stabilization:

Press MENUO and open the Picture menu, highlight PictureSettings and press @.

Highlight Advanced Picture Settings and press @. [n the Film Stabilization field, select Smooth.

4To save the new settings, highlight [loue and press @. To revert to the factory defaults, highlight Reset

and press @. Note:

oIf you select one of the factory-setpicture modes (Sports, Standard, Movie or PC) and then change the Film Stabilization setting, the picture mode automatically changes to Preference.

oWhen ClearFrame is set to Off, Film Stabilization will be grayed out and set to Off automaticalljz

oWhen slow motion video is present the units will treat any scrolling text as Film and may cause a slight jitter of the scrolling text. Tuning Off the Film Stabilization feature will correct this issue.

UsingCableClear® digital noise reduction

The CableClea¢" digital noise reduction feature

allows you to reduce visible interference in your TV picture. This may be useful when receiving a

broadcast with a weak signal (especially a Cable

channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

MENU

1Press 0 and open the Picture menu, highlight

Noise Reduction and press @.

2[n the CableClear field, select your desired setting.

Note:

o if the current input is ANT/CABLE, VIDEO, the menu will display the text "Cab/eClear " The available selections are Off, Low, Middle, and High.

o If the current input is ColorStream HD, HDMI 1, HDMI 2 or HDMI 3, the menu

will display the text "DNR." The available selections are Off, Low, Middle, and High. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectiveljz

3To save the l!ew setth!gs, highlight Doue and

press @.

To revert to the factory defaults, highlight Reset

and press @. (cominued)

53