Toshiba 55HT1U manual Using the Locks menu, Enteringthe PiN code, Changingyour PiN code

Using the Doiby® DigRal Dynamic

Range Control feature

This dynamic range control feature causes the ATSC

dynamic range to be further compressed, allowing

you to switch from ATSC to analog broadcasts at the same dynamic range.

To use tile Dolby Digital Dynamic Range Control:

Press MENUO and open the Sound menu.

2Highlight AUdiOSetup and press @.

3[n the DoJby Digital DynamicRangeControlfield, select Compressed. When Standard is selected, the audio is output with minimal compression.

4.To save the new settings, highlight Done and

press @.

To revert to the factory defaults, highlight Reset and press @.

No te:

°This item will be grayed out for NTSC signals, Video, ColorStream, and PC inputs.

°The Dolby Digital Dynamic Range Control will function in relation to Optical Output Format (PCM mode).

•The LockSystemscreen (below) appears if a PIN code has not been stored. Press the Channel

Number buttons to enter a new four-digit code, enter the code a second time to confirm, and press @.

•The Locks/Activescreen appears if the PIN code is already stored. Use the Number buttons to

enter your four-digit code and press @.

If the wrong PIN code is entered, the message

"Incorrect PIN code, please try again!" appears.

Highlight Retry and press @. Enter the code again and press @.

When the correct PIN code is entered, the Locksmenu opens.

No te:

PIN code can not be set to "0000".

Using the Locks menu

The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, [nput Lock, Front (Control) Panel Lock, GameTimer, and New PIN Code features. You can use these features after

entering the correct PIN code.

Enteringthe PiN code

Press MENU(2) and highlight the Locksmenu icon.

Press V, which displays the PIN code entry

screen.

if you cannot remember your PiN code

While the PIN code entering screen is displayed, press four times within five seconds. The PIN code will

be cleared and you can enter a new PIN code.

Changingyour PiN code

MENU

1 Press 0 and highlight the Locksmenu icon.

Press '_' to display the PIN code entering screen.

Enter your four-digit PIN code and press @.

Press Y to highlight New PiN Code and press @.

5Press the Number buttons to enter a new four- digit code. Reenter the PIN code to confirm it.

6Press @. The new PIN code is now active.

Note:

PIN code can not be set to "0000".

(conrin ued)

40