Connecting aDVDplayer with ColorStream®(component video), aVCR,

and a sateJJJte receiver

TVbackpanel Fromantenna
31.
StereoVCR
SateiJJtereceiverwith componentvideoor
DVDplayer withcomponentvideo
You will need:
coaxial cables
standardA/V cables
_Ifyou have a mono VCR, connect L/MONO
on the TVto your VCR's audio out terminal
using the whiteaudio cable only
standard audio cables
component video cables
-Youcan connect the component video cables
(plus audio cables) from the DVD player or
satellite receiver to the ColorStream terminal
on the TV.The ColorStream HD terminal
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems.
A 1080i signal willprovide the bestpicture
performance (1080p is not supported).
-Ifyour DVD player or satelfite receiver
does not have component video, connect
a standard A/V cable to VIDEO on the side
panel. If your DVD player has HDMI video,
see page 16.
To view antenna or Cable channels:
Select the ANT/CABLEvideo input source on the TV. '_
To view the DVD player:
Turn ON the DVD player. Select the Co[orStream HD
video input source oll the TV. '_
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the Co[orStream
HI}video input source on theTV.'_
To view the VCR or view and record
antenna channels:
TurnON theVCR. Tunethe VCR tothe channel you want
to watch. Selectthe VIDE0video input source onthe TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record. Select the Co[orStream HDvideo input source
on the TV* to view the DVD.
,,- Toselect the video input source, press INPUTon
the remote control (t:__page 21). Toprogram the
TVremote control to operate other devices, see
Chapter 3.
Theunauthorizedrecording,use,distribution,or
revisionoftelevisionprograms,videotapes,DVDs,
andothermaterialsisprohibitedunderthe Copyright
LawsoftheUnitedStatesandothercountries,andmay
subjectyouto civil and criminalliability.
15