Setup/InstaRaUonmenulayout
The Installation menu contains the Terrestrial and System Status menus.
To open the installationmenu (illustrated below), press MENU
© on the remote control or TV control panel, open the
Setup menu, select Installation,and press @.
Terrestrial [nput Configuration + [Opens the [nput Configuration menu]
Channel Program + [Start] + [Scans for new channels oil ANT/CABLE]
Channel Options + [Opens the Skip /Lock Channel menu]
Channel Tuning Mode + Standard /Auto /Digital
Eastern /Newfoundland /Atlantic /Hawaii /Alaska /
Time Zone Pacific /Mountain /Central
Signal Meter + [Opens the Signal Meter menu]

SystemStatus

System l[nformation _ [Opens the System l[nformation screen]
Navigatingthe menusystem
You can use the buttons on the remote control or TV
control panel toaccess and navigate your TV's oil-
screen menl.l system.
MENU
•Press O toopen the menu system.

Note:

The menu background may sometimes appear
black, depending on the signal the TVis
receiving. This is not a sign of malfunction.
•When amenu is open, use the up/down/left/right
arrow buttons (_ V ._ _ ) on the remote control
or TV control panel to move in the corresponding
direction in the menu.
•Press @ to save your menu settings or select
a highlighted item. (A highlighted menu item
appears ill a different color ill the menu.)
•All menus close automatically if you do not make
a selection within 60 seconds, except the signal
meter menu, which closes automatically after
about 5minutes.
EXIT
•To close amenu instantly, press O •
23