Toshiba 55HT1U manual Selecting stereo/SAPbroadcasts, Adjustingthe audio quaIRy

3Press A or V to select AudJ0, and then press 4 or _" to select the desired service.

,Press EXITO.

Selecting stereo/SAPbroadcasts

The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the word "STEREO" or "SAP" appears on-screen when

is pressed.The MTS feature is only available for analog signals on the ANT/CABLEinput.

To listen to stereo sound:

Press MENU© and ()pen tl_e S0uud menu.

2Highlight Audio Setupand press @. In the NTS field, select Stereo.

4' To save the new settings, highlight [}0ue and press @.

To reset the settings to the factory defaults, highlight Reset and press @.

Note:

°You can typically leave the TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural).

,,If the stereo sound is noisy, select Mono to reduce the noise.

To listen to an alternate language on an

ATSC digital station (if available):

Highlight the Language field in step 3 above, and then press 4 or 1_ to select the language you prefer.

To listen to a second audio program on an analog station (if available):

Select SAP in step 3 above.

Note:

°A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you

will see the current program on the screen but

hear the other language instead of the program's normal audio.

./fyou have SAP on and the station you are

watching is not broadcasting a second audio program, the station's normal audio will be

outpuL However, occasionally there is no sound at all in SAP mode. ff this happens, set the MTS feature to Stereo mode.

Adjustingthe audio quaIRy

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1Press u_u and open the Sound menu. Highlight Audio SettJugs and press @.

Press V or A to highlight the item you want to adjust (Bass, Treble, or Balance).

Press "9 or _ to adjust the level.

°"_ makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

,,_ makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

5To save the new settings, highlight Doueand press

. To reset the settings to the factory defaults,

highlight Reset and press @.

Selecting the optical audio output format

You can use this feature to select the optical audio output format when you connect a Dolby Digital

decoder or other digital audio system to the 0ptJcaJ

Audio Out terminal on the TV (see "Connecting a digital audio system" on page 18).

To select the optical audio output format:

MENU

1Press 0 and open the Sound menu. Highlight Audio Setup and press @.

In the Optical Output Format field, select either D01byDigitalor PeN dependingon your device.

4' To save the new settings, highlight [}0ue and press @_j_.To revert to the factory defaults, highlight Reset and press @.

(continued)

39