![](/images/new-backgrounds/1133873/133873111x1.webp)
Soundproblems
* Check the antenna/cable connections (_ Chapter 2).
. The station may have broadcast difficulties. Try another channel.
. The sound may be muted. Press VOLUME.
. [f you hear 11o sound, try setting the MTS feature to Stereo mode (_:_ page 39).
. [f yon are not receiving a second audio program from a known SAP source, make sure the NTS feature is set to SAP mode (_:_ page 39).
. [f yon hear audio that seems "incorrect" for the
program you are watching (such as music or a
foreign language), the SAP mode may be on. Set the MTS feature to Stereo mode (_:_ page 39).
Remote control problems
•Make sure the remote control is set to the correct device mode (_:_ page 21 ).
•Remove all obstructions between the remote control and the TV.
•The remote control batteries may be dead. Replace the batteries (_:_ page 20).
•[f the TV still does not act as expected, use the
Reset Factory Defaults procedure (_:_ page 28).
Channeltuning proNems
•Make sure the remote control is set to the correct device mode (_:_ page 21 ).
•The channel may have been erased from the
channel memory by the Programming channels automaticallyfeature. Add the channel to the
channel memory (_ page 25).
•The channel may be blocked by the LOCK
feature. Unblock the channel (_ page 42).
•[f yon are unable to tune digital channels, check
the antenna configuration (_ page 24). If yon
are still unable to tune digital channels, clear all
channels from the channel list and reprogram
channels into the channel memory (_ page 24). [f yon are still ramble to tune digital channels,
use the Reset Factory Defaults procedure (_
page 28). Also see "TV stops responding to
controls" and "Other problems" (_ page 62).
Closedcaption problems
*[f the program or video you selected is not
. [f text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature (_:_>page 37).
. A
correctly in the following situations: a) when
a videotape has been dubbed; b) when the
signal reception is weak; or c) when the signal
reception is nonstandard (_:_>page 37).
Rating blocking (V-Chip)problems
•[f you forget your PIN code: While the PIN
code entering screen is displayed, press
four times within 5 seconds. The PIN code yon
previously stored will be cleared (_ page 40).
Ho REGZA-L]HKoperation
* | The | feature | is available | for | |||
| Toshiba | compatible | devices. | ||||
. | Make | sure | the HDM[ | cables with | the | HDM[ | |
| Logo | (H='_Tlr) | are used. |
|
| ||
. | When | the | connected |
|
| device | |
| does not work correctly after you have changed | ||||||
| settings of the device, turn off your TV and | ||||||
| unplug the power cord, then plug and turn on | ||||||
| again. |
|
|
|
|
|
|
. | [f several | devices are | connected, | ||||
| feature may not operate properly. |
|
| ||||
. | Read | the | instruction | manual | furnished | with the | |
| connected | device. |
|
|
HDNI problems
For HDMI cab/os
•Make sure to use cables with the HDM[ Logo
_) (_ page 13). |
Nedia Player problems
*Make sure that devices are connected correctly.
. Incorrect behavior may occur with a USB HUB connection.
. Photo files that was processed and edited by
using the PC's application software may not be able to be viewed.
. The TV may select one format automatically and
play it when contents that support two or more formats are played.
. Contents that PC originally recorded may not be able to be played correctly.
56