Toshiba 55HT1U manual Usingthe auto aspectratio feature, Scrolling the TheaterWide picture

To set the scroll settings:

Native

MENU

1 Press © and open the Picture menu.

2 Highlight TheaterSettingsand press _@.

{for 480i {HDNI), 4SOp{HDNI), 720p, lOSOi, and lOSOp signal programs)

©©©

®If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

,,This is especially useful for external HD sources such as DVHS movies, or PC graphics.

Note:

®This mode is supported only for HDMI

(1080p, 1080L 720p, 480p, and 4800, ColorStream (1080i and 720p), and ANTi CABLE (digital) inputs (1080p, 1080i, and 720p).

,,Depending on the input signals, the border of the picture may be hidden, displayed in black, or nois_

Dot by Dot

(for VGA, SVGA, RGA, WXGA,and

SXGAsources only)

The "Dot by Dot" picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source)

*To view the hidden areas (such as subtitles or captions), see below "Scrolling the TheaterWide ® picture".

Scrolling the TheaterWide® picture

(TheaterWide2 and 3 only)

You can set separate scroll settings tBr the TheaterWide 2 and TheaterWide 3 modes for each input.

3 [n the PictureSizefield, select either TheaterWide2 or TheaterWide 3 (you cal!l!Ot scroll in any other mode).

4' Dess _!' to highlight the Picture Scroll field.

SDess @ or _ to scroll the picture up and down as needed.

6 To save the new settings, highlight Done and

press @. To revert to the factory defaults, highlightResetand press @_j_.

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Usingthe auto aspectratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i, 480p, 720p, 1080i digital signal from the

ANT/CABLEinput

•A 480i signal from the V_[}E0input

•A 480i signal from the C010rStreamNDinput

•A 480i, 480p, 720p, 1080i, 1080p, orVGA (60Hz) signal from the N[}N_1/2/3 input

4:3	normal	Natural		(with	sidebars)
4:3	letter box	TheaterWide			2
16:9	full	Full
Not	defined (no	The	current		picture	size you
[D-1 data or		set	under	"Selecting		the

HDM[ aspect		data)	picture	size" on page 33.
Note: The auto aspect ratio feature is not
applicable	to	PC	input.	(c.o_fim,,d)

35