Pioneer VSX-917V-S/-K manual Other Settings, Other Setup menu, Assigning the Hdmi inputs

Page 63

Other Settings

12

2Select the number of the component

video input to which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs on the back of the receiver.

3Select the component that corresponds with the one you connected to that input. Select between DVD, TV, DVR or OFF.

• Use

and ENTER to do this.

•Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver.

•If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver’s component video MONITOR output (down converting component video is not possible after assigning an input).

4When you’re finished, press RETURN. You return to the Input Assign menu.

Assigning the HDMI inputs

•Default settings:

HDMI - 1 – DVD

HDMI - 2 – TV

You only need to do this if you didn’t hook up your HDMI equipment according to the default settings for the HDMI inputs (see above), so that you see the proper video signal when you select the input source.

1Select ‘HDMI Input’ from the Input Assign menu.

5. Input Assign

a.Digital Input b.Component Input c.HDMI Input

:Return

2Select the number of the HDMI input to which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs on the back of the receiver.

3 Select the component that corresponds

 

with the one you connected to that input.

English

Select between DVD, TV, DVR or OFF.

 

• Use

 

and ENTER to do this.

 

• To hear audio from your HDMI component

 

 

 

(through this system), you must also make

 

 

 

 

 

 

separate audio connections to the

 

Deutsch

 

 

corresponding inputs on the rear of the

 

 

 

 

 

 

 

receiver. For more on this, see Connecting

 

 

 

 

using HDMI on page 57.

 

 

 

 

 

 

• If you connect any video component to the

 

 

 

 

receiver using HDMI, you should also have

 

Français

4 When you’re finished, press RETURN.

 

 

 

your TV connected to this receiver’s HDMI

 

 

 

 

output.

 

 

 

 

 

 

 

 

 

 

 

 

 

You return to the Input Assign menu.

 

Italiano

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Other Setup menu is where you can make

 

The Other Setup menu

 

 

customized settings to reflect how you are

 

 

using the receiver.

 

 

 

 

 

 

 

 

 

Nederlands

1 Press RECEIVER on the remote control,

 

 

 

then press the SETUP button.

 

 

 

 

 

 

An on-screen display (OSD) appears on your

 

 

TV. Use

 

 

and ENTER on the remote

 

 

control to navigate through the screens and

 

 

select menu items. Press RETURN to confirm

 

Español

and exit the current menu.

 

 

 

 

 

 

 

 

 

 

 

2 Select ‘Other Setup’ then press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System Setup

 

 

 

6.Other Setup

 

 

 

 

 

 

 

1.Surr

Back System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a.DRC

Setup

 

 

 

 

 

 

2.Auto

MCACC

 

 

 

b.Dual

Mono Setup

 

 

 

 

 

 

 

 

 

 

3.Manual

MCACC

 

 

 

c.LFE

ATT Setup

 

 

 

 

 

4.Manual

SP Setup

 

 

 

d.SR+

Setup

 

 

 

 

 

5.Input

Assign

 

 

 

e.DVC

Setup

 

 

 

 

 

6.Other

Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: Exit

 

 

 

 

:Return

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•DRC Setup – Specify the amount of dynamic range adjustment to Dolby Digital or DTS soundtracks (see Dynamic Range Control Setup on page 64).

63

En

Page 62 Page 64
Image 63
Page 62 Page 64
Contents VSX-917V-S/-K Risk of Electric Shock Do not Open Important the Moulded PlugVoltage selector Ventilation CautionOperating Environment Contents Other connections Other SettingsMaking recordings Controlling the rest of your systemChecking what’s in the box Installing the receiverBefore you start Before you start ChapterBefore you start Ventilation Listening to Surround Sound Minute guide02 5 minute guide Chapter Introduction to home theaterThen press Enter Minute guideMake sure ‘Normal SB’ is selected Nederlands EspañolMake sure ‘OK’ is selected, then press 02 5 minute guideFollow the instructions on-screen Wait for the test tones to finishBetter sound using Phase Control Other problems when using the Auto Mcacc SetupPress Phase Phase Control to switch on phase correction Connecting up Connecting up ChapterMaking cable connections Connecting up About the video converter Connecting up Connecting a DVD player and TV Connect the analog audio outputs fromThis receiver to a video input on your TV Digital OPT 2 TV/SAT input on this Connecting upConnecting the multichannel analog outputs Audio and Video inputs on this receiver.2About the WMA9 Pro decoder Connecting other audio componentsUse a coaxial digital audio cable for the connection.3 Connecting other video componentsUse a three-way component video cable for the connection Using the component video jacksConnecting to the front panel video terminal Connecting to the front panel audio mini jackTo improve AM reception Connecting up Connecting antennasUsing external antennas To improve FM receptionThis receiver Powered Connecting up Connecting the speakersHints on speaker placement Overhead view of speaker setup View of 7.1 channel speaker setupYou can also refer to the 3-D speaker setup illustration on STANDBY/ON Controls and displaysControls and displays Chapter Front panelDisplay Controls and displaysAuto Surr DigitalVIR.SB DirectNumber buttons / other component and receiver controls Controls and displays Remote controlReceiver Multi Control buttonsComponent control buttons ADV.SURR Use to switch between the various surround modes5TUNE/ST +/- /ENTER TV Control buttonsOperating range of remote control Listening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening to your system Setting the effect optionsUsing the Advanced surround effects Setting What it doesSTEREO/F.S.SURR to select Front Stage Using Stream DirectUsing Front Stage Surround Advance Listening in stereoUsing surround back channel processing Using Virtual Surround Back VSBListening with Acoustic Calibration EQ Using Midnight and Loudness Using the Sound RetrieverVirtual surround back channel option Playing other sources Using the tone controlsChoosing the input signal Listening to your system Enhancing dialogPress F.AUDIO SHIFT+DVD on the remote control Selecting the front audio inputsPlayback the connected component Basic playback controls Using the USB interfaceUSB playback USB playback ChapterAbout MPEG-4 AAC USB playbackCompressed audio compatibility Other compatibility informationSelect the setting you want to adjust System Setup menuSystem Setup menu Chapter Surround back speaker settingManual Mcacc speaker setup System Setup menuFine Speaker Distance Select ‘Fine Ch Level’ from the Manual Mcacc setup menuSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Channel LevelAcoustic Calibration EQ Setting the Acoustic Calibration EQ AutomaticallySelect ‘OK’ to copy and confirm Copying your Acoustic Calibration EQ settingsSetting the Acoustic Calibration EQ manually Select ‘EQ Data Copy’ from the Manual Mcacc setup menuChecking your Acoustic Calibration EQ settings Manual speaker setupManual SP Setup menu Speaker SettingChannel Level Default setting 100HzSelect ‘Crossover Network’ from the Manual SP Setup menu Crossover NetworkSpeaker Distance Listening to the radio Using the tunerUsing the tuner Chapter Saving station presetsChanging the frequency step Using the tunerNaming station presets Listening to station presetsMaking recordings Making recordings ChapterMaking an audio or a video recording Operating other Pioneer components Setting the remote to control other componentsControlling the rest of your system Controlling the rest of your system ChapterPress and hold Enter for about two seconds Erasing all of the remote control presetsUse Name from the list then press EnterControlling the rest of your system Direct function Confirming preset codesUse to switch direct function on or OFF then press Enter LCD shows OK to confirm the settingControlling the rest of your system Controls for TVs TOP Menu Controlling the rest of your systemControls for other components Disc MenuDisc RECSHIFT+ REC Stop+ CH+ HDD Shift+ CH DVD ShiftConnecting using Hdmi Other connectionsOther connections Chapter About Hdmi Second Zone speaker B setupSwitching the speaker system Other connectionsBi-amping your front speakers Same terminal in this way Other connections Bi-wiring your speakersDVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayAssigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuOther Settings Other Setup menuAssigning the Hdmi inputs Dynamic Range Control Setup Dual Mono SetupLFE Attenuator Setup Select the ‘PDP Volume Control’ setting you want SR+ Setup for Pioneer plasma displaysDigital Video Converter Setup Select ‘SR+ Setup’ from the Other Setup menuAdditional information Chapter TroubleshootingProblemRemedy Additional informationAdditional information Problem RemedySee Operating other Pioneer components on Symptom RemedyPress Setup to confirm Additional information Resetting the main unitSwitching the speaker impedance Changing the TV format settingAdditional information Specifications Miscellaneous Power cord cautionCleaning the unit AM Tuner SectionPioneer Corporation
Top Page Image Contents