Fostex LM16 Effect to Group controls, Effect to Stereo control, Effect to AUX 1, 2, 3 controls

Model LM16 [Names and functions]

(22) [EFFECT TO GROUP] controls

Each control adjusts the output level from the

internal effects to the corresponding group buss pairs

(1-2 or 3-4). See page 31 for details.

(23) [EFFECT TO STEREO] control

Adjusts the output level from the internal effects to

the stereo busses. See page 31 for details.

(24) [EFFECT TO AUX (1, 2, 3)] controls

Each control adjusts the output level from the

17

internal effects to the corresponding AUX buss (1, 2

or 3). See page 31 for details.

18

19

(25) [AUX SEND] controls / [SOLO] switches

Each [AUX SEND] control adjusts the output level of

the corresponding AUX SEND (1, 2 or 3) output.

Each [SOLO] switch allows you to monitor the soloed

signal of the corresponding AUX SEND (1, 2 or 3)

20

output. When the switch is down, the solo function is

engaged. Each press of the switch toggles between

on and off (See page 30 for details).

21

(26) [MONITOR] control

Adjusts the output level of the [MONITOR (L/R)] and

23

[PHONES] jacks. The output level of the [PHONES]

22

jack is controlled by the [PHONES] and [MONITOR]

controls (See page 32 for details).

24 (27) [EFF SEND] control / [SOLO] switch

Adjusts the output level of the EFFECT SEND .

25

Each [SOLO] switch allows you to monitor the soloed

signal of the EFFECT SEND output. When the switch

is down (

), the solo function is engaged. Each press

26

27

of the switch toggles between on and off.

28

(28) [ASSIGN TO STEREO OUT] switches

29

Each switch allows you to send the post signal of the

corresponding GROUP fader to the [STEREO OUT

L/R] jacks. When the switch is down, the signal is

sent ( See page 33 for details).

(29) [OUTPUT LIMITER] switch

Activates or deactivates the limiter function for all

the buss outputs (stereo L/R outputs, group outputs

1 through 4, Aux send outputs 1 through 3, effect

send output, and monitor outputs). When the switch

30

31

is down (

), the limiter function is active.

(30) [GROUP 1-4] faders

Each fader adjusts the output level of the

corresponding group output signal which is output

from the [GROUP OUT] jack (See page 33 for details).

(31) [STEREO] fader

Adjusts the output level of the stereo output signal

which is output from the [STEREO OUT (L/R)] and

[ST MIX OUT (L/R)] jacks.