Fostex LM16 manual R peak indicators, R meters between 7

Model LM16 [Upgrading the software]

• L and R peak indicators

Depending on the major version number, each of the L and R peak indicators is lit or unlit as shown in the table below.

PEAK indicator

Value L	R
1
2
3
4		: lit

• L and R meters (between 7 and -30)

The L meter shows the minor version number (the second digit), while the R meter shows the sub minor version (the third digit). See the table below for the relation between the number and the lighting condition.

L meter								R meter
No.
0	1	2	3	4	5	6	7	8	9
LED					HEX値

7

4

2

0

- 2

- 4

- 7

- 10

- 20

-30

: lit

<Example>: The following shows the meter con- dition when the current version is "Version

1.23".Unlit

How to upgrade the version

The following explains how to upgrade the software version.

You can download the upgraded software (lat- est version) from the FOSTEX website (http:/ /www.fostex.com/). After downloading the file, copy it to a USB memory stick. (The down- loaded file has the file extension ".mot". See the FOSTEX website for details about down- loading.)

<Note>: If you cannot download the soft- ware file from the FOSTEX website, ask your local FOSTEX dealer or service station.

(1)Turn on the power of the unit.

(2)Connect the USB memory stick to which you copied the downloaded file to the [USB (HOST)] port.

						INPUT
		GROUP (+4dBu)		EFF SEND (-2dBu)	AUX SEND (-2dBu)	INSERT	INSERT	INSERT	INSERT
R	STEREO OUT (+4dBu)	L	ST MIX OUT (-10dBV)	USB	MIDI OUT		CONTROLLER
									PHAN

USB memory stick

After reading the file information, the unit enter the version upgrade mode and shows the version information (version number and date) of the file using the [PEAK] indicators on input channels as well as the L and R meters and peak indi- cators, while the [STOP] and [REC] indi- cators start flashing.

(See the previous section for details about how the information is shown.)

<Note>: To cancel performing upgrade, press the [STOP] key while the [STOP] and [REC] indicators are flashing.

The unit exits the upgrade mode.

(3)Press the [REC] key.

The unit performs upgrade.

When upgrade is completed, the system automatically restarts the unit.

Lit

Lit

<Memo>: While performing upgrade, the [PEAK] indicators of all channels are lit. While performing upgrade of the main unit, the [PHANTOM 1-8] indicator slowly flashes. While performing up- grade of the control unit, the [PHAN- TOM 9-16] indicator slowly flashes.

37