Dynacord 2200-3, 1600-3, 1000-3 owner manual Parameter Value, Disable

Page 33

POWERMATE3

Illustration 3-17: Device Setup dialog

Device Setup

 

Display Brightness

 

100%

 

 

 

 

 

Screensaver

Off

 

 

 

Personalize

ENTER

 

 

 

Tooltips

On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BACK

ESC

Display Brightness

The currently set display brightness (from 0% to 100%) is indicated in the right column. Press the MENU/ENTER ro- tary encoder to edit the value. Turn the MENU/ENTER ro- tary encoder to the left to decrease the display brightness. Turn the MENU/ENTER rotary encoder to the right to increase the display brightness. Press the MENU/ ENTER rotary encoder to apply the selected brightness. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode.

Screensaver

The currently set screensaver time interval is shown. Af- ter the time interval (from 10 seconds to 60 minutes) has expired the screensaver is activated. Press the MENU/EN- TER rotary encoder to edit the value. Turn the MENU/EN- TER rotary encoder to the left to shorten the time interval, or deactivate the screensaver by selecting Off. Turn the MENU/ENTER rotary encoder to the right to ex- tend the time interval. Press the MENU/ENTER rotary en- coder to apply the selected setting. Pressing the BACK function key returns to the menu. Pressing the ESC func- tion key returns to effect mode.

Personalize

Press the MENU/ENTER rotary encoder to open the Set Device Name dialog. This dialog is used to change the PowerMate‘s name, which can be composed of a maxi- mum of 18 symbols and consist of all letters A-Z, a-z, the numbers 0-9 and special characters.

Turn the MENU/ENTER rotary encoder to the left or right to edit the highlighted character. Pressing the MENU/EN- TER rotary encoder accepts the desired symbol and moves the cursor to the next character. Move the cursor to the left or to the right by pressing the or function keys. Select the ↵ symbol or press the OK function key to quit editing the name.

Pressing the BACK function key returns to the menu. Pressing the ESC function returns to effect mode.

Tooltips

The indication of Tooltips, e.g. when opening the Speaker Protection dialog, can be activated or deactivated. Press the MENU/ENTER rotary encoder to edit the setting. Turn the MENU/ENTER rotary encoder to select On if Tooltips should be displayed. Select Off if Tooltips should not be displayed. Press the MENU/ENTER rotary encoder to ap- ply the selected setting. Pressing the BACK function key returns to the menu. Pressing the ESC function key re- turns to effect mode.

Play USB to 2TRACK

Select „enable“ if the DIGITAL AUDIO INTERFACE should be used for playback of background music - e.g. using a PC/Mac - in STANDBY mode.

HINT: If Play USB to 2TRACK is enabled a confirma- tion prompt appears in the display when acti- vating STANDBY mode. Press the MENU/ENTER rotary encoder to confirm.

If „disable“ is selected the signal received via the DIGITAL AUDIO INTERFACE is muted in STANDBY mode. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode.

Factory Reset

The PowerMate can be reset to factory settings. Pressing the MENU/ENTER rotary encoder opens a clear user FX di- alog box that lets the user choose between YES or NO by turning the MENU/ENTER rotary encoder. Select YES if all user effects should be cleared. Select NO if the user ef- fects should not be cleared. Pressing the MENU/ENTER rotary encoder opens a safety dialog box „Are you sure?“ that lets the user choose between YES or NO by turning the MENU/ENTER rotary encoder. If YES has been select- ed, pressing the MENU/ENTER rotary encoder resets the PowerMate to its factory settings. If NO has been select- ed, all parameters stay unchanged and the display re- turns to the menu. Pressing the BACK function key returns to the menu. Pressing the ESC function key re- turns to effect mode.

The following table lists all parameters that are affected by a reset.

Parameter

Value

 

 

USB Record Routing

Live

 

 

Equalizer Routing

Left and right channel of master output

 

 

LPN Processing

High

 

 

Speaker Protection

Power Control off (deactivated)

 

 

Footswitch Ctrl.

FX 1+2

 

 

TAP Button Ctrl.

FX 1+2

 

 

FX 1 Start Preset

5

 

 

FX 2 Start Preset

55

 

 

FX 1 MIDI Channel

Off

 

 

FX 2 MIDI Channel

Off

 

 

MIDI PrgCh Count

1 - 128

 

 

Display Brightness

100%

 

 

Screensaver

Off

 

 

Device Name

PowerMate

 

 

Tooltips

On (activated)

 

 

Play USB to 2TRACK

Disable

 

 

Table 3-18: Factory settings

Firmware Info

Press the MENU/ENTER rotary encoder to open the Firmware Info dialog. This dialog shows the versions of the firmwares that are actually installed in the PowerMa- te. Pressing the BACK function key returns to the menu. Pressing the ESC function key returns to effect mode.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents PowerMate 1000-3 1600-3 PowerMate3POWERMATE3 Contents Inhalt Important Safety Instructions Warranty Installation and Connections IntroductionScope of Delivery, Unpacking and Inspection Open the lid as shown in following illustration Close the lid as shown in following illustration Input Mono Controls, Indicators and ConnectionsMIC LineGain Control InsertVoice Filter LO CUT 80 HZEQ Section AUX 1/2 FX 1/2MON 1/2 PANSIG / PK Indicator PFLFader Stereo Input L/MONO R Input StereoGain MIC PowerMateGain Line CD / USB InputFX 1/2 AUX 1/2 SIG/PK MON 1/2 BALFX ON/OFF FX 1/2FX 1/2 Sends Socket FX 1/2 Send ControlFX 1/2 to MON 1/2 FX 1/2 to AUX 1/2PK LED FX onMON 1/2 AUX 1/2AUX Post Feedback FilterPFL Button MON 1/2 FaderUSB Master LED-DISPLAY Master with GEQMaster L/R Fader StandbyMaster a OUT L/R Inputs Power AMP L/RMaster B Outputs L/R Master B64 2TRACK to Master 63 2TRACK in L/RREC Send & USB OUT Lamp 12V/5W67 11-BAND Stereo Graphic Equalizer Display with function keysGraphic EQ to Master / MON 1/2 MenuTAP Stereo Power AmplifierPower Amplifier Status IndicatorsRear panel Midi IN/OUTIllustration 2-20 Connection of a passive speaker Menu mode Effect modeDisplay & functions Number DescriptionEdit FX 1 / FX FX Control SetupAssignment Setting DescriptionParameter Description Parameter Value DisableEffect group Description Preferable used with EffectsCubase LE Installing the USB driverStatus display PC-MIDI-InterfaceDisplay Description Stereo Input PowerMate 1000 1600 2200 Examples of usage PlaybackExamples of usage Recording Live Midi tone generator and multi-effect unit Setting up a standard PA OverviewCabling PowerMate Cable Application Setting upSoundcheck Monitor MIX Maximum amount of passive speakers Master Patchbay and different setup alternativesUsing the internal power amps for monitoring Connection of an external power amplifierMono PA + Monitor Active 2-way stereo configuration Wichtige Sicherheitshinweise Einführung Lieferumfang, Auspacken und ÜberprüfenGarantie Aufstellen und Anschließen Öffnen Sie den Deckel wie in folgender Abbildung gezeigt Schließen Sie den Deckel wie in folgender Abbildung gezeigt Bedienelemente und Anschlüsse MIC-BUCHSELINE-BUCHSE GAIN-REGLER INSERT-BUCHSEVoice FILTER-SCHALTER LO CUT 80 HZ-SCHALTERFX 1/2-REGLER Klangregelung HI-, MID-, LO-REGLERMON 1/2-REGLER AUX 1/2-REGLERPAN-REGLER MUTE-SCHALTERSIG / PK-ANZEIGE Stereo Input L/MONO R-BUCHSEN Eingang Gain MIC-REGLERGain Line CD / USB-REGLER SIG/PK-ANZEIGE BAL-REGLERFX ON/OFF-BUCHSE FX 1/2 SEND-REGLER FX 1/2 SENDS-BUCHSENPK-ANZEIGE FX ON-SCHALTERAUX POST-SCHALTER AUX 1/2 SENDS-BUCHSENAUX SEND-FADER MON 1/2 OUTPUTS-BUCHSENMON 1/2-FADER Master mit GEQ Master L/R-FADERSTANDBY-SCHALTER Master a OUT L/R-BUCHSEN Inputs Power AMP L/R-BUCHSENMaster B Outputs L/R-BUCHSEN Master B-REGLERREC Send L/R-BUCHSEN 63 2TRACK in L/R-BUCHSENREC Send & USB OUT-REGLER Abbildung 2-17 Belegung der Lamp 12V/5W-Buchse Display mit Funktions-Tasten Stereo-LeistungsverstärkerMENU/ENTER-DREHENCODER PROTECT-LED Status AnzeigeMidi IN/OUT-BUCHSEN RückseiteEffekt-Betriebsart Display & FunktionenMenü-Betriebsart Nummer BeschreibungEdit FX1 / FX2 Menu FX Control SetupZuordnung Tieftonlautsprecher geeignet Gewünschte Ergebnis erzielt werdenKann das LPN-Filter deaktiviert werden Parameter Beschreibung Parameter Wert Power Control off deaktiviertEqualizer Routing LPN Processing HighEffektgruppe Beschreibung Bevorzugte Anwendung EffekteInstallation des USB-Treibers Anzeige Beschreibung Funktionsanzeige im DisplayInterface ist betriebsbereit USB OUT-Reglers MasterAnwendungsbeispiele Wiedergabe Anwendungsbeispiele Aufnahme MIDI-Klangerzeuger und Multieffektgerät Aufbau einer Standard-PA ÜbersichtVerkabelung Kabel Anwendung Aufbau Hauptmix Maximale Ausbaustufe, Passivbetrieb Master Patchbay und verschiedene AufbauversionenVerwendung der internen Endstufen für Monitore Anschluss eines externen LeistungsverstärkersAbbildung 6-4 Mono PA + Monitor Aktiv Stereo 2-Weg System Property PowerMate SpecificationsPhantom Power, switchable in groups Switching Mode Power Supply µC controlledDimensions W x H x D, mm FS 11 Footswitch with LEDDimensions Block Diagram Trademarks POWERMATE3 POWERMATE3 Dynacord
Top Page Image Contents