Dynacord DRM 4000 owner manual View Menu, Communication Menu, About Menu, Basic Configuration

SOFTWARE EDITOR DRM 4000

View Menu

-Change the status of the symbol bar - visible / invisible

-Change the status of the status bar - visible / invisible

Note:

For low-resolution monitors (800 x 600 pixels or less), turning off the display of the symbol and status bars might be advantageous, leaving more space for displaying the main window and therefore might lessen the need for scrolling.

Communication Menu

-Select the desired COM-port

-Open the RS-232-monitor

- Establish data-communication with the DRM 4000 - Quit data-communication with the DRM 4000

- Transfer data from the PC to the DRM 4000 - Receive data from the DRM 4000

-Display the DRM 4000’s firmware version (only possible when in on-line mode)

About Menu

- Provides general information about the DRM 4000 Editor software

7.4.3 Basic Configuration

The parameters to be set here represent the mixer’s basic configuration, which is always active when none of the DRM 4000’s contact inputs are engaged. When the DRM 4000 is connected to your PC, using the “Online Control”-soft key allows establishing any settings in real-time.

7-3