Dynacord DRM 4000 owner manual Basic Configuration

C O N FIGURING THE DRM 4000

Legend to the table on the DRM 4000 FACTORY CONFIGURATION leaflet:

BASIC CONFIGURATION:		The BASIC CONFIGURATION is active when no CONTROL
		INPUT is connected to ground. The BASIC CONFIGURATION
		always has the lowest priority.
CONTACT 1-8:		The DRM 4000’s active configuration accords to the CONTROL
		INPUT, which is connected to ground, as long as no other
		CONTROL INPUT with a higher priority setting is connected
		to ground.
PRIORITY:		Each CONTROL INPUT has an assigned PRIORITY between
		1 and 8. PRIORITY 0 - the lowest priority level - relates to the
		BASIC CONFIGURATION. The CONTROL INPUT with the
		highest priority setting is the active one (PRIORITY 8 represents
		the highest priority level) when several CONTROL INPUTS
		are connected to ground.
Routing:	Off	The input signal is not assigned to any output.
	Mono A	The input signal is only assigned to output A. AUX-inputs are
		summed for monaural output.
	Mono B	The input signal is only assigned to output B. AUX-inputs are
		summed for monaural output.
	Dual	The input signal is assigned to the outputs A and B.
		AUX-inputs are summed for monaural output via the outputs
		A and B.
	Stereo	AUX-input L is assigned to output A while AUX-input R is
		assigned to output B. (this option is only available for AUX-inputs)
	No Change	The control input parameters are not changed from the BASIC
		CONFIGURATION.
Mute:	No Mute	The output signal is connected through to the masters A resp. B.
	Mute On	Output relays switch the output signal off of masters A resp. B.
	No Change	The control input parameters are not changed from the
		BASIC CONFIGURATION.
VCA:		The MASTER outputs A resp. B are attenuated by the according
		value in dB.
Priority Override:	Enable	MIC/LINE-input activates ducking control.
	Disable	MIC/LINE-input does not activate ducking control.
Ducking:	Ducking Active	Ducking control is activated by the contact.
	Auto Ducking	Ducking control is automatically activated, when the level in
		MIC/LINE 1 or 2 is exceeding the Ducking Threshold (automatic
		level detection function). Please note, that is a precondition
		routing MIC/LINE 1 or 2 to the corresponding Master output and
		setting the parameter Priority Override to Enable.
	No Change	The control input’s parameters are not changed from the
		BASIC CONFIGURATION.

8-2