Denon DN-X1600 owner manual Output Terminal Connection

Page 12

ENGLISH

GettingStarted	Output Terminal Connection
	Output Terminal Connection
Connections
Basic Operations
Effector
Function		Tape deck	Booth balanced
			power ampliﬁer
	CD recorder
FaderStart	or PC	Main unbalanced	Effects processor	Video
		Main unbalanced	Effects processor	Video
		power ampliﬁer		mixer
		power ampliﬁer		mixer
			Main balanced
USB		power ampliﬁer
USB			Sequencer
			Sequencer
Utility
Speciﬁcations
Troubleshooting

COAXIAL DIGITAL OUT terminal (44.1/ 48/ 96kHz)

Output from this RCA terminal is the digital output data.

These signals are not affected by the master level adjustments.

We recommend using an RCA cable designed for digital signals (75 ohms). (This can be purchased from an audio/video store.)

MIDI output terminal

This is a 5 Pin DIN connector output terminal. This is connected to a MIDI-compatible device.

REC OUT terminals

These are the recording output terminals.

MASTER OUT (UNBALANCED) terminals

This stereo pair of RCA terminals provides a unbalanced line level output.

Connect these terminals to the unbalanced analog input terminals on an ampliﬁer or console.

MASTER OUT (BALANCED) terminals

These XLR type connectors provide a balanced line level output.

Connect these connectors to the balanced analog input connectors on an ampliﬁer or console.

•Pin layout:

1.GND

2.Hot

3.Cold

•Applicable connector: Cannon XLR-3-32 or equivalent.

BOOTH OUT (BALANCED) terminals

These TRS terminals are balanced line output terminals whose signal levels are adjusted using the BOOTH LEVEL control provided on the top panel.

•Pin layout (TRS): Tip: Hot

Ring: Cold

Sleeve: GND

SEND/RETURN terminals

These 1/4” TS mono terminals allow external processing of the program signal.

When connect monaural type effect processor, use Lch input and output.

•SEND (output):

Connect this to the input terminal on the external effector.

•RETURN (input):

Connect this to the output terminal on the external effector.

HEADPHONE output jack

Accepts 1/4” stereo headphone plugs.

NOTE

To prevent hearing loss, do not raise the volume level excessively when using headphones.

8

Image 12

Contents DN-X1600 Important Safety Instructions Achtung Declaration of ConformityÜbereinstimmungserklärung AttenzioneHinweis ZUM Recycling UNE Remarque Concernant LE RecyclageNota Relativa AL Riciclaggio Acerca DEL ReciclajeContents Accessories InstallationGetting Started Main Features LinkPart Names and Functions Top Panel Split CUE OFF Split CUE on Thru Q9CROSSFADERDisplay Rear PanelConnections PreparationsInput Terminal Connection Cables Used for ConnectionsOutput Terminal Connection Connecting the Power Cord Connections to USB Memory or USB CableUSB a terminal USB B terminalBasic Operations Basic OperationsMonitor headphones output MIC mic inputDucking function Effector Function BeatBreaker FunctionSetting the BPM Setting the beatEffecter Operations Selecting the effectsFader Start Function Channel Fader StartFader setting the fader curve How to adjust the Crossfader torqueCrossfader Start USB Settings Selecting the USB modeUSB audio Setting the USB audio output Setting the USB audio inputSetting the Midi channels Setting the Midi clockMidi layer operations DVS function Midi Command List Send commandsReceive commands Utility settings Utility operationsPreset Items and Data Setting DetailsPreset Export Preset ImportPreset Recall Owner Setting ModeSpeciﬁcations Block Diagram Troubleshooting