Denon DN-X1600 owner manual Specifications

Specifications

n AUDIO		(0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms)
•	PHONO inputs	Stereo x 3	Unbalanced RCA terminal
	Input impedance:	47 kΩ
	Level:	–40 dBV (10 mV)
	Signal to Noise ratio:	89 dB
•	CD inputs	Stereo x 5	Unbalanced RCA terminal
	Input impedance:	10 kΩ
	Level:	0 dBV
	Signal to Noise ratio:	100 dB
•	Equalizer (LINE)	Band x 3
	Channel equalization adjustment range:
		HI: –∞,–90 dB to +10 dB
		MID: –∞,–90 dB to +10 dB
		LOW: –∞,–90 dB to +6 dB
•	RETURN inputs	Monaural x 2	1/4" TS terminal
	Input impedance:	10 kΩ
	Level:	–10dBV/0dBV (Default: –10dBV)
•	MIC inputs	Monaural x 2
	MIC1:	Balanced	XLR connectors
		(1: Ground, 2: Hot, 3: Cold)
	MIC2:	Balanced	1/4" TRS jack
		(Tip: hot, ring: cold, sleeve: ground)
	Input impedance:	5 kΩ
	Level:	–60 to –20 dBu
	EIN:	Less than –126 dBu (Rs = 150 Ω)
	CMRR:	More than 89 dB (1 kHz)
•	Equalizer (MIC)	Band x 2
	Adjustment range:	HI: –15 to +15 dB
		LOW: –15 to +15 dB
•	USB audio inputs	Stereo x 4 (monaural x 8) 24 bit, Fs: 44.1 kHz, 48 kHz, 96 kHz USB B
•	MASTER output
	Balanced:	Stereo, balanced XLR terminal
		(1: Ground, 2: Hot, 3: Cold)
	DA converter:	32-bit 128x oversampling advanced segment converter
	Load impedance:	More than 600 Ω
	Level:	+4dBu (Max.: +24 dBu)
	Frequency response:	20 Hz to 20 kHz (±0.5 dB)
	THD:	Less than 0.05%
	Crosstalk:	Less than –100 dB (1 kHz)
	Unbalanced:	Stereo RCA terminal

•BOOTH output

Load impedance: Level:

•SEND output Load impedance: Level:

•Headphones output Load impedance: Level:

•Digital coaxial output

•USB audio output

nGENERAL USB MIDI I/O: MIDI OUT:

Channel level meters: Cue master level meters: Channel Fader: Crossfader:

Dimensions:

Weight: Supply voltage:

Power consumption: Operational temperature: Operational humidity: Storage temperature:

369	(14”1/16)
	357

		ENGLISH
Stereo	Balanced 1/4" TRS terminal		Getting
More than 600 Ω
(Tip: hot; ring: cold, sleeve: ground)			Started
+4 dBu (Max.: +24 dBu)
Monaural x 2	Unbalanced 1/4" TS terminal
10 kΩ			Connections
150 mW
–10 dBV (Max.: +10 dBV)
Stereo
40 Ω
Stereo RCA terminal, IEC958 Consumer			Basic
(Fs: 44.1 kHz, 48 kHz, 96 kHz)
Stereo x 4 (monaural x 8) 24 bit, 44.1 kHz, 48 kHz, 96 kHz USB B			Operations
IN: 1ch, OUT: 1ch MIDI1.0, MIDI Clock		USB B
OUT: 1ch MIDI1.0, MIDI Clock		5pin DIN	Effector
PPM 16-point LEDs from –40 to +10 dB, peak display
PPM 16-point LEDs from –40 to +10 dB, peak display
60 mm Slim Type fader			Function
45 mm FLEX Fader (Fader Torque Adjustable)
320(W) x 357(D) x 91(H) mm (12”5/8 (W) x 14”1/16 (D) x 3”5/8 (H))
6.2 Kg (13.7 lbs)			Fader
AC 230 V, 50 Hz (European models)
AC 120 V, 60 Hz (U.S.A. and Canada models)			Start
34 W
+5ºC to +35ºC (+41 F to +95 F)
25% to 85%			USB
–20ºC to +60ºC (-4 F to +140 F)
			Utility
			Specifications
			Troubleshooting

Load impedance:	10 kΩ
Level:	0 dBu (Max.: +20 dBu)
• REC output	Stereo	Unbalanced RCA terminal
Load impedance:	10 kΩ
Level:	–10 dBV (Max.: +10 dBV)

320 (12”5/8) 91 (3”5/8)

113

unit：mm (ins.)

zFor purposes of improvement, specifications and design are subject to change without notice.

25