Denon DN-X1600 owner manual Preset Export, Preset Import, Preset Recall, Owner Setting Mode

Page 28

ENGLISH

Getting

 

Preset Export

 

Writes the details of the settings performed in utility mode to the

Started

 

 

connected USB memory.

 

 

 

1 Connect the USB memory to the unit.

 

 

 

When OK is selected, the presets are restored to the

Preset Import

5 status before they were called.

This imports the setting contents from the export file that was

After the presets are called, they are retained while the

unit remains connected to the computer even if the USB B

written to the USB memory.

After recall is completed, the setting details are updated in the unit.

mode is selected.

 

Connections

 

In the Utility settings, select Other Settings

 

 

 

 

 

2 Preset Export.

Basic

 

 

Press Execute to write the Preset conditions to the

 

 

Operations

 

3 USB memory.

 

If an export file already exists, an overwrite confirmation

 

screen is displayed.

 

 

If you perform Preset Import on a DN-X1700 using a file

Effector

 

exported from a DN-X1600 using Preset Export, the

 

settings in the imported file may be different from those

Function

 

in the exported file. In this case, set the items that are

 

different.

 

 

 

 

 

 

 

 

 

Fader

 

Preset Recall

Start

 

This recalls the setting contents from the export file that was

 

written to the USB memory.

 

 

 

USB

 

After recall is completed, the setting details are not updated in the

 

unit.

 

 

 

 

Use Preset Recall to temporarily use the settings stored in the USB

Utility

 

memory.

 

 

 

 

 

Insert the USB memory device with the export files

 

 

Specifi

 

1 into the DN-X1600 or turn on the unit's power with

 

the device already inserted.

cations

 

 

 

 

 

A screen prompting the user to verify whether the

 

2 presets are to be called appears.

 

 

Troubleshooting

 

When OK is selected, the preset Audio Setting and

 

3 MIDI Setting of the export file are called.

 

The preset information stored inside the DN-X1600 is not

 

updated.

 

 

 

 

 

 

 

 

 

 

 

When the USB memory device is ejected, a screen

 

 

 

 

4 prompting the user to verify whether to return to

 

 

the status before the presets were called appears.

 

 

Cancel cannot be selected.

Owner Setting Mode

When the POWER switch is set to the ON position while the UTILITY/–USB A/USB B button is held down, the Owner Setting mode is established, and the settings listed below can be selected.

To release the Owner Setting mode, set the POWER switch to the OFF position.

 

Parameter

Value

Default

1. Digital Output FS

INT / 44.1kHz / 48kHz / 96kHz

44.1kHz

2. Power ON USB Mode

USB A / USB B

USB A

3.

Preset Import

Exit / Execute*1

-

4.

DN-X1600 Initialize

Exit / Execute*2

-

Using the Preset stored externally, the internal memory is updated, and the settings are reflected in the device.

All the Owner settings and Preset are set to the factory settings.

1.Digital Output FS

This sets the digital output frequency for the unit. When set to INT, the frequency is synchronized with the System Setting sampling frequency.

2.Power ON USB Mode

This selects the USB mode to be used when the power is switched on.

3.Preset Import

Imports the presets from inside the USB memory.

4.DN-X1600 Initialize

Returns all of the items for the unit to the factory settings.

1In the Owner Setting mode, insert the USB memory device with the export files into the DN-X1600 or establish the Owner Setting mode with the device already inserted.

2A screen prompting the user to verify whether the preset memory is to be updated appears.

3When OK is selected, the contents of the preset memory are updated to the contents of the export files.

NOTE

Bear in mind that the data prior to the updating will not be retained.

24

Image 28
Contents DN-X1600 Important Safety Instructions Achtung Declaration of ConformityÜbereinstimmungserklärung AttenzioneHinweis ZUM Recycling UNE Remarque Concernant LE RecyclageNota Relativa AL Riciclaggio Acerca DEL ReciclajeContents Installation AccessoriesGetting Started Main Features LinkPart Names and Functions Top PanelSplit CUE OFF Split CUE onThru Q9CROSSFADERDisplay Rear PanelConnections PreparationsInput Terminal Connection Cables Used for ConnectionsOutput Terminal Connection Connecting the Power Cord Connections to USB Memory or USB CableUSB a terminal USB B terminalBasic Operations Basic OperationsMIC mic input Monitor headphones outputDucking function Effector Function BeatBreaker FunctionSetting the BPM Setting the beatEffecter Operations Selecting the effectsFader Start Function Channel Fader StartHow to adjust the Crossfader torque Fader setting the fader curveCrossfader Start Selecting the USB mode USB SettingsUSB audio Setting the USB audio output Setting the USB audio inputSetting the Midi clock Setting the Midi channelsMidi layer operations DVS function Midi Command List Send commandsReceive commands Utility settings Utility operationsPreset Items and Data Setting DetailsPreset Export Preset ImportPreset Recall Owner Setting ModeSpecifications Block Diagram Troubleshooting