ENGLISH
Getting Started
Basic Operations
Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting
|
|
|
| Basic Operations | ||
|
|
|
|
|
|
|
|
|
|
|
|
| Press the POWER ON/OFF switch to turn the unit's |
|
|
|
|
|
| |
|
|
| 1 power ON. | |||
|
|
|
2 Use the SOURCE SEL controls to select the channels
from 1 to 4 of the sources to be used
Use the SEL buttons of each LINE to select CD or PHONO as the LINE input.
3 While checking the input level on the level meter, adjust the input levels using the channel LEVEL controls.
4 Adjust the sound quality using the channel EQ controls (HI, MID, LOW).
5Assignment of the channel signals can be switched using the CROSSFADER ASSIGN switches.
Set these switches to the THRU position if the Crossfader is not going to be used.
6Adjust the volume level using the Channel Fader and Crossfader.
7Adjust the output level using the MASTER LEVEL control.
10