Denon DN-X1600 Effecter Operations, Setting the BPM, Setting the beat, Selecting the effects

Page 17







 

Effecter Operations

Selecting the effector units and channels

With the input channels:

Using the EFX SEND button, select the effect units to be used. The same effect can be selected for a multiple number of channels.

With the mic input and master output:

Using the EFX INS button, select the effect unit to be used. The insertion operation is initiated and just the one channel is selected.

Setting the BPM

1When the auto BPM counter is off, press the TAP button for over 1 second to turn the auto BPM counter on.

2 When the auto BPM counter is on, press the TAP button and release it immediately. The data measured with the auto BPM function is locked.

The channel for which the effect unit was last selected using the EFX SEND or EFX INS button takes effect as the channel used for the auto BPM counter measurement.

3If the TAP button is pressed down for over 2 seconds, the BPM value can be set directly by pressing the

BEAT buttons.

4The BPM value can be set by the interval during which the TAP buttons are repeatedly pressed.

ENGLISH

 

 

 

Getting Started

 



 

Connections

 

 

Basic

 



 

 

 

Operations

 

&'9

 

 

4&-&$5

 

 

Setting the beat

&'9

 

EffectorFunction

0/0''

 

 

 

 

Press the BEAT ,

buttons to set the number

Fader

1 of beats.

 

 

Start

When the TIME button is pressed, the mode is

 

 

USB

2 changed to the time input mode.

 

 

 

The time can be adjusted by pressing the BEAT

,

 

buttons.

 

 

Utility

When the TIME button is pressed again, the number

Specifications

3 of beats setting mode is restored.

 

 

 

Selecting the effects

 

 

Troubleshooting

Turning the effects ON and OFF

 

Turn the EFX SELECT controls to select the effect, and press the control

 

to enter the desired effect.

 

 

 

When the Effect ON/OFF buttons are pressed, the effect is turned ON

 

or OFF.

 

 

 

13

Image 17
Contents DN-X1600 Important Safety Instructions Declaration of Conformity AchtungÜbereinstimmungserklärung AttenzioneUNE Remarque Concernant LE Recyclage Hinweis ZUM RecyclingNota Relativa AL Riciclaggio Acerca DEL ReciclajeContents Getting Started AccessoriesInstallation Link Main FeaturesTop Panel Part Names and FunctionsSplit CUE on Split CUE OFFThru Q9CROSSFADERRear Panel DisplayPreparations ConnectionsInput Terminal Connection Cables Used for ConnectionsOutput Terminal Connection Connections to USB Memory or USB Cable Connecting the Power CordUSB a terminal USB B terminalBasic Operations Basic OperationsDucking function Monitor headphones outputMIC mic input BeatBreaker Function Effector FunctionSetting the beat Setting the BPMEffecter Operations Selecting the effectsChannel Fader Start Fader Start FunctionCrossfader Start Fader setting the fader curveHow to adjust the Crossfader torque USB audio USB SettingsSelecting the USB mode Setting the USB audio input Setting the USB audio outputMidi layer operations Setting the Midi channelsSetting the Midi clock DVS function Send commands Midi Command ListReceive commands Utility operations Utility settingsSetting Details Preset Items and DataPreset Import Preset ExportPreset Recall Owner Setting ModeSpecifications Block Diagram Troubleshooting