Denon DN-X1600 owner manual USB Settings, USB audio, Selecting the USB mode

Page 20

ENGLISH

Getting Started

USB Settings

Connections Basic Operations Effector Function Fader Start





1Press the UTILITY/–USB A/USB B button for more than a second.

Operation now transfers to the screen shown below.

USB audio

This unit features a 24-bit 96 kHz USB audio input/output sound card function which supports up to 8 channels (4 stereo systems). The sampling frequency can be set to 44.1 kHz, 48 kHz or 96 kHz using a Utility setting (factory setting: 96 kHz).

•When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, install DENON DJ ASIO driver Ver2 contained on the CD-ROM provided. Operation cannot be guaranteed on computers that are running with an OS prior to Windows XP SP2.

•If the Ver1 driver is already installed, first uninstall it, and then install the Ver2 driver.

•Depending on the computer used, select the PC/MAC section settings under System Setting among the Utility settings.

USB Utility Specifications Troubleshooting

Selecting the USB mode

The respective functions given below are carried out in the operation modes of the USB A terminal (USB host mode) and USB B terminal (USB device mode).

USB A :

•Preset data import/export function

•Version upgrading

USB B :

•USB audio interface function

•USB MIDI interface function

The operation mode to be established when the unit's power is turned on can be selected by a Utility setting.

(Factory setting: USB A)

Follow the procedure below to switch from USB host mode (USB A terminal) to USB device mode (USB B terminal).

2Select OK/Cancel using the EFX SELECT control, and press the button to enter the selection.

•The indicator changes from USB-A to USB-B, and the device mode is established.

•When a specific period of time elapses with no computer connected to the USB B terminal, the indicator changes back to USB-A, and the host mode is automatically selected.

3To select the host mode again, press the UTILITY/– USB A/USB B button for more than a second, and select the settings by following the same steps.

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DN-X1600 Important Safety Instructions Achtung Declaration of ConformityÜbereinstimmungserklärung AttenzioneHinweis ZUM Recycling UNE Remarque Concernant LE RecyclageNota Relativa AL Riciclaggio Acerca DEL ReciclajeContents Getting Started AccessoriesInstallation Main Features LinkPart Names and Functions Top PanelSplit CUE OFF Split CUE onThru Q9CROSSFADERDisplay Rear PanelConnections PreparationsInput Terminal Connection Cables Used for ConnectionsOutput Terminal Connection Connecting the Power Cord Connections to USB Memory or USB CableUSB a terminal USB B terminalBasic Operations Basic OperationsDucking function Monitor headphones outputMIC mic input Effector Function BeatBreaker FunctionSetting the BPM Setting the beatEffecter Operations Selecting the effectsFader Start Function Channel Fader StartCrossfader Start Fader setting the fader curveHow to adjust the Crossfader torque USB audio USB SettingsSelecting the USB mode Setting the USB audio output Setting the USB audio inputMidi layer operations Setting the Midi channelsSetting the Midi clock DVS function Midi Command List Send commandsReceive commands Utility settings Utility operationsPreset Items and Data Setting DetailsPreset Export Preset ImportPreset Recall Owner Setting ModeSpecifications Block Diagram Troubleshooting
Top Page Image Contents