Tapco MIX10FXP manual Rear Panel Features, Power Connection, Power Switch

Rear Panel Features

2

1

3

4

1. POWER CONNECTION

This jack accepts the supplied 3-prong IEC AC power cord.

Before you plug the AC power cord into the powered mixer, make

sure that the voltage of your unit is the same voltage as your local AC mains supply. Use only the power cord

supplied. Also, disconnecting the plug’s ground pin is dangerous. Please don’t do it.

2. POWER SWITCH

Press the top of this rocker switch to turn on the mixer. The front panel power LED (22) will glow with happiness, or at least it will if you have the mixer plugged into a suitable live AC mains supply.

Press the bottom of this switch to turn off the mixer, whenever you feel that this would be a safe thing to do. Half-way through a guitar solo by RagnaKX, self-proclaimed Rock-Master-General from the Metal Planet Tarquin-5 might not be such a good time.

As a general guide, you should turn on your mixer fi rst, before any external power amplifi ers or powered speakers, and turn it off last. This will reduce the possibility of any turn-on, or turn-off thumps in your speakers.

10