Tapco MIX10FXP manual Outdoor gig

Outdoor gig

Electric
Guitar	Acoustic Guitar
Bass	and Mic
Guitar
	Vocal
Drum Kit Mics	Microphones

DI Box

Gtr

Proc.

Amp Mode

switch set to

StereoMain

6912 Passive Speakers

(play stereo main mix)

TAPCO J-1400

Power AmplifierTAPCO J-2500

Power Amplifier

Recorder

Stage Monitors

6925 Passive Speakers
(play stereo main mix)
This diagram shows drum kit microphones connected to channels 1 to 4, a guitar connected via a TAPCO DI
box to channel 5, a guitar processor connected to the line input of channel 6, an acoustic guitar with guitar
mic connected to channel 7, and vocal mics connected to channels 8, 9 and 10.
A TAPCO J-1400 power amplifi er is connected to the line-level monitor send output, and powers two passive
stage monitors. Monitor EQ can be adjusted with the monitor graphic EQ, and internal FX added.
A portable recorder is attached to the stereo tape RCA outputs to record the performance.
The amp mode switch is set to stereo mains. TAPCO 6912 passive speakers are connected to the speaker-level
outputs, and they play the main stereo mix to your audience. A TAPCO J-2500 power amplifi er is connected to
the main line-level outputs, and supplies speaker-level power to 6925 passive speakers to reinforce the volume
for outdoor events.	9