House of Worship

Microphones

6912 Passive Speakers

Electric

Guitar

Acoustic Guitar

and Mic

DB-1ADI Box

Amp Mode

switchsetto Stereo Main

6912 Passive Speakers

CD/DVD

Player

	Keyboard 1
		Thump TH-15A
		Powered Speakers
		in Overflow Room
	Keyboard 2	or Cry Room
	Keyboard 2
	TAPCO J-2500	TAPCO Link.USB
	Power Amplifier	TAPCO Link.USB
	Power Amplifier

USB

Laptop

Stage Monitors

This diagram shows microphones attached to channels 1 to 4, an electric guitar connected via a TAPCO DB-1A DI box to channel 5, a guitar mic to channel 6, keyboards attached to channel 7 and 8 stereo inputs, and a CD/DVD player connected to channel 9's RCA inputs. A TAPCO Link.USB Digital Audio Interface is attached to the stereo tape outputs to record the performance via USB onto a laptop.

A TAPCO J-2500 power ampliﬁ er is connected to the line-level monitor send output, and powers four passive stage monitors, two per side.

TAPCO 6912 passive speakers are connected to the speaker-level power output of the powered mixer, and they play the main mix to your audience. There are two per side, connected in parallel, (minimum impedance of 4 ohms per side).

TAPCO Thump TH15A powered speakers are connected to the main line-level outputs, and are set up to play the main mix to an overﬂ ow room. Alternatively, you could run Thump TH18s powered subwoofers to reinforce the low end in your main room.