Tapco MIX10FXP manual Hookup Diagrams, Club System

Hookup Diagrams

Club System

Microphones

Electric

Guitar

Acoustic Guitar

and Mic

DB-1ADIBox

Amp Mode

switchsetto Stereo Main

6915 Passive Speakers (plays stereo main mix)

Recorder

Keyboard

TAPCO J-2500

Power Amplifier

Pole Mount

TAPCO Thump-15A Powered Speakers used as Stage Monitors

6918s Passive Subwoofers

This diagram shows microphones attached to channels 1 to 4, an electric guitar connected via a TAPCO DB-1A DI box to channel 5, an acoustic guitar and mic to channel 6, and a keyboard attached to channel 7's stereo inputs. A portable recorder is attached to the stereo tape outputs to record the performance.

TAPCO Thump TH15A powered speakers are connected to the monitor send, and are set up as stage monitors. The aux mon controls of each channel allow you to create a stage monitor mix that is independent of the main mix. Use the monitor graphic EQ to adjust the stage monitor EQ as desired.

TAPCO 6915 passive speakers are connected to the speaker-level power output of the powered mixer, and they play the main stereo mix to your audience. The Series 69 EQ switch is engaged to enhance the performance with these Series 69 speakers. TAPCO 6918s passive subwoofers are powered by a TAPCO J-2500 power amplifi er, connected to the main line outputs to reinforce the low end in your system.

6